Model 99  (160-0537)         Inputs and Outputs        Faxback Doc. # 7930

The CHANNEL 3/4 switch and the TV/VCR and INPUT buttons control the input
and output signals of your VCR.  This section explains how to select the
channels you view and record.

SETTING THE CHANNEL 3/4 SWITCH

Set the VCR's CHANNEL 3/4 switch (on the back of the VCR) to 3 or 4, 
whichever is not an active channel in your area.

When VCR appears on the display, the VCR sends the selected video source
from its TO TV OUT terminal to the TV.

The CHANNEL 3/4 switch has no effect on the TV when the VCR is off, when
VCR does not appear on the display, or if you are using a TV which has
separate audio/video input jacks and which is set to the TV mode.

USING THE TV/VCR BUTTON

The Model 99's 179-channel (68 VHF/UHF channels, 111 cable channels) tuner
is active anytime you turn it on.

Press the TV/VCR button on the remote control so VCR appears on the
display, and you can then use the VCR's tuner to select the channel you
view.

To select a channel with the TV's tuner, press TV/VCR so VCR does not show
and set the TV to the TV mode.

Whenever the VCR is on, the signals from the VCR are sent to the
AUDIO/VIDEO OUT jacks, regardless of the TV/VCR setting.

USING INPUT

To choose a signal to record, press INPUT on the remote control until the
desired indication appears in the display window; a channel number for
recording VHF/UHF signals, or AV for recording signals from the VCR's
AUDIO/VIDEO IN jacks.

NOTE:  INPUT has no effect during tape playback or when the VCR is turned
       off.

(ALL-11/10/94)

Privacy Policy