Portable TV  (160-0165)           Connections          Faxback Doc. # 7818

CONNECTING AN EXTERNAL ANTENNA

If you in an area with weak TV signals, or are inside a metal or concrete
building, you might need an external outdoor antenna to improve reception. 
Connect the antenna to the EXT ANT jack.

If your antenna wire is 75-ohm coaxial cable, use an F-to-mini plug
adapter to complete the connection.  We recommend Radio Shack Cat. No.
278-257.  If you have 300-ohm wire, use a 300-to-75-ohm mini plug adapter. 
We recommend Cat. No. 15-1148.

CONNECTING TO A CHANNEL 3/4 OUTPUT

Use the EXT ANT jack to connect a camcorder, VCR, video disc player, or
other audio/video component that has a channel 3/4 output terminal.

USING THE TV AS A MONITOR

You can connect an audio/video component to the TVs AUDIO/VIDEO jack. 
This requires a special cable (not supplied), available through your local
Radio Shack store by special order (CMC 16-2324).

NOTE:  Do not use standard audio patch cords for this connection.  The
       audio and video signals will be distorted.

To use the cable, connect its yellow plug to the audio/video component's
video output jack and its white plug to the component's audio output jack. 
Then, plug the cable's sub-mini plug into the TV's AUDIO/VIDEO input jack.

NOTE:  The TV cannot receive antenna or cable TV signals when the cable is
       connected to the TV's AUDIO/VIDEO jack.

(ALL-10/13/94)

Privacy Policy