ITZA-2000 Universal Remote Control
(150-2000)        Setting Up Your Remote Control      Faxback Doc. # 65867

Note: Some manufacturers have several codes listed. Try each until you find 
the right one. 

Press the device key for the type of remote you are replacing (TV, VCR, AUX 
or CBL). The red light blinks. 

Hold down P until the red light blinks twice, then enter the 4-digit code 
in Step 1. 

For example, to replace a Panasonic TV's remote control (manufacturer's 
code 0051), press TV, hold down P until the red light blinks twice, then 
press 0 - 0 - 5 - 1. 

When the red light blinks twice, the code has been accepted. 

Note: If the code you entered is invalid, the red light blinks. 

Point the remote control at your device and press POWER. Your device should 
turn off (or on, if it was off).

If the remote does not operate your device, try the other codes listed 
above for your brand of device. 

Repeat Steps 2-4 for additional devices.  

Privacy Policy