UHF/Cable RF Modulator
(150-1243)                 Features                   Faxback Doc. # 63353

The UHF/Cable RF Modulator is an agile mono modulator with digital type 
channel selection, multi-channel frequency, and RF output.  It accepts 
left and right audio and video signals from satellite receivers, VCRs, 
disc players, and CCTV cameras.  It has full channel memory for power 
outages and allows switch-free distribution of audio and video in UHF and 
cable TV channels.

Its other features include:

           Digital Display - shows modes and channels selected.

      Digital Type Channel - lets you select clear channels to transmit.

               HRC and IRC - cable modes.

        Digital PLL Tuning - limits channel drift.

   Full Channel Memory for - retains the last channel after the power is
             Power Outages   lost.

Wide Selection of Channels - lets you choose from UHF channels 14 to 69,
                             and CATV/HRC/IRC channels 65 to 94 and 100 to

The FCC Wants You to Know

This equipment has been tested and found to comply with the limits for a 
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits 
are designed to provide reasonable protection against harmful interference 
in a residential installation.  This equipment generates, uses and can 
radiate radio frequency energy and if not installed and used in accordance 
with the instructions, may cause harmful interference to radio 

However, there is no guarantee that interference will not occur in a 
particular installation. If this equipment does cause harmful interference 
to radio or television reception, which can be determined by turning the 
equipment off and on, the user is encouraged to try to correct the 
interference by one or more of the following measures:

  Reorient or relocate the receiving antenna.

  Increase the separation between the equipment and receiver.

  Connect the equipment into an outlet on a circuit different from that to
  which the receiver is connected.

  Consult your local RadioShack store or an experienced radio/TV
  technician for help.

  If you cannot eliminate the interference, the FCC requires that you stop
  using your modulator.

Changes or modifications not expressly approved by RadioShack may cause 
interference and void the user's authority to operate the equipment.

FCC Declaration of Conformity

This device complies with Part 15 of the FCC Rules.  Operation is subject 
to the following two conditions: (1) this device may not cause harmful 
interference, and (2) this device must accept any interference received, 
including interference that may cause undesired operation.
      |                                               |
      |            Product:  UHF/Cable RF Modulator   |
      |              Model:  15-1243                  |
      |  Responsible Party:  RadioShack               |
      |                      100 Throckmorton         |
      |                      Fort Worth, TX 76102     |
      |                                               |
      |              Phone:  817-415-3200             |

WARNING: To reduce the risk of fire or shock hazard, do not expose this
         product to rain or moisture.

CAUTION: To reduce the risk of electric shock, do not remove cover or
         back.  No user-serviceable parts inside.  Refer servicing to
         qualified personnel.

(EB 11/9/00)

Privacy Policy