13" Color TV/VCR (160-0415) Control Locations Faxback Doc. # 6842
USING THE FRONT PANEL CONTROLS
This section briefly describes the function of each button on the TV/VCR's
front panel. Each function is described in detail later in this manual.
Cassette Compartment - Load the video cassette tape here.
Power - Turns the TV/VCR on or off. The power
button lights when the TV/VCR is on.
Eject - Removes the cassette tape.
P/STILL (Pause/Still) Indicator - Lights when P/STILL is pressed.
CST IN (Cassette In) Indicator - Lights when a cassette is loaded.
Timer (Stand-By) Indicator - Lights when a program is set to record
and the TV/VCR is off.
Play Indicator - Lights when playback starts.
RECORD Indicator - Lights when the VS is recording.
RENTAL (Position) Indicator - Lights when RENTAL POSITION ON is
selected.
Note: Pull down on the door to see the remaining front panel buttons.
STOP - Stops the tape.
REW/<< (REWIND/REVIEW) - Rewinds when the tape is stopped and
reviews when the tape is playing.
Play - Plays back video cassette tapes.
FF/>> (FAST FORWARD/CUE) - Fast forwards when the tape is stopped
and cues fast pictures search when the
tape is playing.
REC (Record) - Press REC and PLAY at the same time to
start time to start recording. REC
appears on the TV screen and the RECORD
indicator lights.
P/STILL (Pause/Still) - Pauses the recording or shows a still
frame during playback. Press again
to resume recording or playback.
A. PROG (AUTO PROGRAM) - Automatically locates all viewable
channels.
PICTURE - Selects picture adjustment.
VOL -/+ - Adjusts volume/picture quality.
CH -/+ - Adjusts the channel to the next lowest
or highest.
QSR START - Selects the QSR (Quick Start Recording)
start time for immediate recording.
QSR LENGTH - Selects the QSR recording length.
USING THE REMOTE CONTROL
The remote control has all of the same controls as are on the TV/VCR's
front panel, as well as the additional controls described in this section.
To operate the remote control, point its front window toward the TV/VCR's
front panel. Then press the desired button(s) on the remote control.
SLEEP - Sets the sleep timer.
MUTE - Mutes the sound. Press again to return
to the previous volume level.
Number Buttons - Press to select a channel.
TV/CATV/AV - Select the TV, CATV or AV mode.
100 - Selects channels over 100 when in the
CATV mode. (For example, press 100,
2, 3 in the order to select channel
123).
SP/LP/EP (Tape Speed) - Changes the recording speed. (Playback
speed is set automatically.)
CLOCK/COUNT/REMAIN - Switches between the time, counter and
tape remaining display.
RESET - Resets the tape counter.
TV ON/OFF - Turns the TV on or off without
controlling the VS.
MENU - Shows the on-screen function menu.
CLR/MON (Clear/Monitor) - Clears an incorrect entry when
programming or lets you view TV
programs during cassette playback.
DISPLAY - Display the VCR's operation mode,
channel number, tape speed, date, day,
and clock.
Notes: The on-screen display disappears after 5 seconds and is not
recorded. The date, day and time appear only after you have set
the clock.
Slide the bottom half of the remote control down to see the
remaining buttons.
Set UP - Shows the on-screen setup menu.
PICTURE - Selects the picture adjustment.
Caption - Selects the closed-caption function.
-/+ - Adjust picture or caption settings.
A.TRACK (Auto Tracking ) DOWN/UP - Returns to the automatic tracking
function, or manually adjusts the
picture.
VISS - Selects the VISS (Video Index Search
System) mode.
ERASE - Erases a VISS mark.
MARK - Puts a VISS index mark on a tape during
recording or playback.
Installing the Remote Control's Batteries
You need two AA batteries to power the remote control. For the longest
battery life, we recommend alkaline batteries (Radio Shack Cat. No. 23-
552). To ensure consistent operation, change the batteries about once a
year.
1. Remove the battery compartment cover by sliding it in the direction of
the arrow.
2. Install two AA batteries as indicated by the polarity symbols (+ and
-) marked inside the compartment.
Caution: Batteries installed incorrectly might leak and damage the remote
control. Do not mix old batteries with new ones, and do not
mix different types of batteries (for example, standard and
alkaline).
3. Replace the battery compartment cover.
(LB/all-7/14/94)
Privacy Policy