VHF/UHF Television  (160-0245)      Power Sources     Faxback Doc. # 6415
with AM/FM Radio

You can power your TV/radio using either of these power sources:

  Standard household electricity (using the supplied AC adapter)

  12-volt vehicle battery (using the supplied DC adapter cord)

USING STANDARD AC POWER

To use AC power, connect the supplied AC adapter to the DC 12-15V jack on
the back of the TV/radio.  Then plug the other end into a standard AC
outlet.

Caution:  Use only an AC adapter that supplies 13.5 volts DC, delivers 1
          Amp, and has a center positive plug which properly fits the TV/
          radio's DC 12-15V jack.  Using an adapter that does not meet
          these specifications could damage the TV/radio or the adapter.

Always unplug an adapter from the outlet first before unplugging it from
the TV/radio.

USING YOUR VEHICLE'S BATTERY POWER

You can power the TV/radio from your vehicle's cigarette lighter socket
using the supplied DC adapter cord.

Cautions:

  Your vehicle must have a 12-volt negative ground system.

  Watching TV while operating a motor vehicle can present a traffic
  hazard.

Follow these steps to power the power the TV/radio from your vehicle's
battery power.

1.  Plug the small end of the supplied DC adapter cord into the DC 12-15V
    jack.

Caution:  Use only a DC Adapter that supplies 12 volts DC and has a
          center positive plug which properly fits the TV/radio's DC
          12-15V jack.  Using an adapter that does not meet these
          specifications could damage the TV/radio or the adapter.

2.  Unplug your vehicles cigarette lighter, and plug the large end of
    the DC adapter cord into the cigarette-lighter socket.

Note:  Always unplug the DC adapter from the cigarette-lighter socket
       before you unplug it from the TV/radio.

(LB/smc-04/27/94)

Privacy Policy