5-Inch Black and White Television
(160-0131A)                Operation                  Faxback Doc. # 57196

1.  Rotate VOLUME OFF/MAX clockwise until it clicks to turn on the TV.

2.  Set TV/AV to TV to receive a TV signal, or to AV to receive signals
    from an audio/video source connected to the TV's AUDIO INPUT or VIDEO
    INPUT jack.

3.  Set VHF LO/VHF HI/UHF to the desired band.

    VHF LO - to select the VHF low channels (2 through 6).

    VHF HI - to select the VHF high channels (7 through 13).

    UHF - to select the UHF channels (14 through 69).

4.  Turn TUNING to the desired station.

5.  Adjust the built-in telescoping antenna for the best picture and
    sound.

6.  Turn BRIGHTNESS, CONTRAST and V-HOLD on the side of the TV.

    BRIGHTNESS - adjust when the picture is too dark or too light.

    CONTRAST - adjust when picture contrast is too weak or too strong.

    V-HOLD - adjust when the picture rolls up or down.

7.  Rotate VOLUME OFF/MAX to adjust the volume to a comfortable level.

8.  To turn off the TV, rotate VOLUME OFF/MAX counterclockwise until it
    clicks.

TV Reception Tips

If the image is blurry, unstable or has "snow," the signal reception might 
be weak.  This can be caused by your location or the telescoping antenna's 
position and length.  Buildings with steel construction can also cause 
reception problems.  Try changing the antenna's position and length.  If 
this does not help, use an outdoor antenna.

If the image does not fill the screen during battery power operation, the 
batteries are weak.  Replace or recharge the batteries.

(EB 10/27/99)