Optimus Color Pocket LCD TV
(160-0179)                 Operation                  Faxback Doc. # 53354

Using Your TV

1.  Extend the rod antenna (unless you have connected an external antenna)

2.  Set VHF/UHF to the desired band.

3.  Press POWER to turn on the TV.  The TV starts scanning the selected
    band and stops at the first active channel.

4.  Press TUNING < or > to tune to a different channel.  The tuning line
    (red for VHF, green for UHF) on the screen aligns with the selected
    channel number below the screen.

5.  Adjust VOLUME.

6.  Adjust BRIGHT for the desired brightness.  The brightness also changes
    with the screen's angle.

Notes:  You can pull out the stand from the back of he TV to set the TV on
        a flat surface.

        If reception is poor, adjust the length or angle and direction of
        the rod antenna.  If you are inside a metal or concrete building,
        moving closer to a window might improve reception.

(EB 7/6/99)