TC-1010 19" TV/Monitor with Remote Control
(160-0260)                 Operation                  Faxback Doc. # 46056

Regular Broadcasts

1.  Turn on the TC-1010, and press the (TV/VIDEO) button so that a 
    two-digit channel number appears.

2.  Set (TV/CATV) as described in Faxback Document # 33496.

3.  Use the channel selector buttons (Up or Down Arrow) to scan through
    the channels until the desired channel number appears.  Or, enter a
    two-digit channel number directly using the remote control.

4.  Adjust VOL, PICTURE, TINT, COLOR, and BRIGHTNESS for the best picture
    and sound.

Monitor Operation

1.  Turn on the TC-1010, and select the video mode by pressing (TV/VIDEO)
    so that P is displayed.

2.  Activate the source signal - VCR, video disc player, external
    TV tuner, satellite system, or other source.

3.  Adjust VOL, PICTURE, TINT, COLOR and BRIGHTNESS for the best picture
    and sound.

Recording Or Monitoring Using The Vidio/Audio Out Jacks

You can connect the VIDEO/AUDIO OUTPUT jacks to a VCR to record the
program selected by the TC-1010's tuner - if  your VCR does not have a
cable ready tuner, for example.

Note:  The program available from the VIDEO/AUDIO OUTPUT jacks is always
       controlled by the TC-1010 is being used to view a source connected
       to its VIDEO/AUDIO IN jacks.

(br/SM 12/31/97)
(Revsd glw 07/22/99)