Model 51 4-Head VHS Stereo Hi-Fi VCR
(160-0621) Troubleshooting Faxback Doc. # 39426
If you follow the instructions in this manual and still have trouble operat-
ing your VCR, refer to the following troubleshooting chart.
SYMPTOM POSSIBLE CAUSE CORRECTIVE ACTION
No power. The power cord is not Plug in the power cord
connected. to an AC outlet.
Timer recording is not The program timer is Set the program timer
possible. not set or set correctly.
incorrectly.
The power is on. Turn off the power.
Record mode cannot be The erase-protection Place a piece of
engaged. tab is missing. plastic tape over the
tab hole.
Picture is poor on The TV channel selector On playback, set the TV
playback. is not set to the proper channel selector to
channel. Channel 3 or 4.
The TV fine tuning is Fine tune your TV.
not set correctly.
Audio/video connections Double check all
are incorrect. connections.
Video distortion on The video head is dirty. Have the video head
playback. cleaned.
The tracking is not Adjust the tracking for
properly adjusted. a better picture.
No picture on playback. The TV is not set to the Set it to the correct
proper channel. channel (channel 3 or
4).
Audio/video connections Double check all
are incorrect. connections.
Operation buttons do The safety device in Try to press EJECT on
not work when the power your VCR is functioning. the VCR several times.
is on and the cassette
is inserted.
Off-the-air TV programs The connections are not Recheck the
cannot be seen. correctly made. connections.
INPUT is not set Set INPUT to the tuner
correctly. mode.
No operation by remote The batteries are weak Replace the batteries.
control. or dead.
(YO/EB 5/9/97)
Privacy Policy