OPTIMUS MODEL 54 4-Head Hi-Fi VCR
(160-0624)                 Clock Operation            Faxback Doc. # 39349

Setting The Clock

Use the remote control to set the clock.  Set the clock accurately for
proper automatic-timer and quick-set recording.  We suggest you refer to a
TV or radio station as your source.

NOTE:  These instructions refer to the TV's on-screen display indicators.
       Some of the indicators on the VCR's display vary slightly.

In the following example, the clock is set to 9:30 PM July 4, 1993.

1.  Press POWER to turn on the VCR.

2.  Turn on your TV and set it to the same channel as the VCR's CH3/CH4
    switch on the back of the VCR (see "Setting the CH3/CH4 Switch" on
    Faxback Doc. # 39350).

    NOTE: If your TV has A/V inputs, be sure to set it to the video mode.

3.  Press MENU on the remote control.  The menu appears on the TV screen.

       PUSH NUMBER SHOWN

       1.  CLOCK SET

       2.  NORMAL PROGRAM

       3.  DAILY PROGRAM

       4.  WEEKLY PROGRAM

       5.  PROGRAM REVIEW

       6.  CALENDAR

       7.  SET UP

       TO END PUSH MENU

4.  Press 1 to enter the clock setting mode.  The first hour digit flashes.

       CLOCK SET

       TIME

       TO END PUSH MENU

5.  Press the remote control's number buttons to set the correct hour and
    minute.  (Press 0 9 3 and 0 to set 9:30, for our example.)

       CLOCK SET

       TIME 09:30

       AM = 1  PM = 2

       TO END PUSH MENU

    NOTES:  Precede all single-digit entries with a 0.

            If you press a wrong number button, press CLEAR/MONITOR, then
            press the correct button.

6.  Press 1 to select AM or 2 to select PM.  Your VCR uses a 12-hour clock.
    (Press 2 to set PM, for our example.)

       CLOCK SET

       TIME 09:30 PM

       MONTH/DAY/YEAR
       DATE

       TO END PUSH MENU

7.  Press the number buttons to set the correct date. (Press 0 7 0 4 9 and 3
    to set July 4, 1993, for our example.)

       CLOCK SET

       TIME 09:30 PM

       MONTH/DAY/YEAR
       DATE 07/04/93
                 SUN

       TO END PUSH MENU

    When you enter the date, the corresponding day of the week appears and
    the VCR's display shows the clock.

8.  Review the entered information.

    If the information is not correct, press CLEAR/MONITOR as necessary to
    erase the wrong information.  Then enter the correct information.

    When the information is correct, press MENU.  The menu reappears on the
    TV screen.  When the VCR is turned off, the clock and day remain on the
    display.

9.  Press MENU to clear the menu from the screen.

    NOTES: If you enter an invalid date or time (13:00, for example, ?
           flashes on the TV screen.  Enter the correct date or time.

           If the display shows an abnormal reading or no reading, unplug
           the power cord for about 3 seconds.  Then plug it back in and
           repeat Steps 1-9 to reset the clock.



(br/EB 5/7/97)

Privacy Policy