Model 29 13" TV Color TV with Built-in VHS HQ VCR
(160-0421)                 Timer                      Faxback Doc. # 35221

USING THE TIMER FEATURES

Setting/Canceling the On Timer

Follow these steps to set the TV/VCR to turn on at a specified time.

1.  Press ON TIMER on the remote control.  The ON TIMER screen appears.

2.  Repeatedly press SEL /\ or SEL \/ to select the hour when you want the
    TV/VCR to start playing, then press SET.

    NOTE:  Your TV/VCR uses a 12-hour clock.  Be sure AM or PM appears.

3.  Repeatedly press SEL /\ or SEL \/ to select the minute when you want the
    TV/VCR to start playing, Then press SET.

4.  Repeatedly press SEL /\ or SEL \/ to select the channel number you want
    the TV/VCR to tune to when it turns itself on, or select PLAY if you
    want the TV/VCR to play a tape when it turns itself on.

    NOTES:  If you want to play a tape when the TV/VCR turns itself on, be
            sure to insert a cassette tape.

            If an entry is not correct repeatedly press SET to move forward
            or CLEAR to move backward to the incorrect entry then correct
            it.

5.  Press ON TIMER. The following screen appears on the TV screen for about
    5 seconds, and the TIMER indicator lights on the front panel.

    The TV/VCR turns itself on at the time you selected.

    To cancel the on timer, press ON TIMER to display ON TIMER SET CANCEL:
    PUSH CLEAR KEY on the TV screen then press CLEAR within about 5 seconds.
    ON TIMER END appears on the screen.

    NOTES:  If ON TIMER SET disappears before you press CLEAR, press ON
            TIMER again.

            After the TV/VCR has been on for 60 minutes it turns itself off
            again unless you press any button on the remote control or front
            panel.

Using the Sleep Timer

The TV/VCR's sleep timer lets you set the TV/VCR so it plays for a specific
amount of time then automatically turns off.

Follow these steps to set the sleep timer.

1.  Press SLEEP on the remote control.  SLEEP TIMER 30 appears on the TV
    screen.

2.  Within 5 seconds, repeatedly press SLEEP until the TV screen shows the
    desired Sleep time period. You can set the time in 30-minute increments
    up to 90 minutes.

    NOTE:  If you do not press SLEEP again within 5 seconds, SLEEP and the
           displayed time period disappear.

To see the remaining time on the sleep timer, press SLEEP. SLEEP TIMER and
the remaining time appear on the screen.

To cancel the Sleep timer, repeatedly press SLEEP until SLEEP TIMER 00
appears on the TV screen.


(BR/EB 10/17/96)

Privacy Policy