Model 29 13" TV Color TV with Built-in VHS HQ VCR
(160-0421)                 TV Operation               Faxback Doc. # 35219

SELECTING CHANNELS

To select a channel, press CH /\ or CH \/. The tuner automatically advances
to the next channel stored in the tuner's memory.  The selected channel
number, (and station name, if available) appears on the upper right part of
the screen for a few seconds.

You can also select channels directly using the number keys on the remote
control.  You can choose any channel in the tuner's range.

NOTES:  Precede a single-digit number with a 0 - for example, 01, 02, etc.

        To enter a three-digit number, press 100 then enter the second and
        third digits in the channel number.

VIEWING TV

Follow these steps to view a broadcast using the TV.

1.  If necessary, press POWER to turn on the TV/VCR.

2.  Select the channel you want to watch.

3.  Repeatedly press VOL - or + to adjust the volume.  A number and a bar
    graph appear on the TV screen to show the currently set volume level.

ADJUSTING THE PICTURE

Follow these steps to adjust the picture's contrast, brightness, color,
tint, and sharpness.

1.  Press MENU on the remote control to display the main menu.

2.  If necessary, repeatedly press SEL /\ or SEL \/ on the remote control
    to highlight TV.

3.  Press SET to select TV.  The SET UP TV screen appears on the TV screen.

4.  Repeatedly press SEL /\ or SEL \/ to highlight VIDEO ADJUST.

5.  Press SET.  A screen appears with the current picture settings.

6.  Repeatedly press SEL /\ or SEL \/ until the setting you want to adjust
    is highlighted, then press SET.  A screen showing the currently set
    adjustment for that setting appears.

    NOTE:  To reset all settings to their factory defaults, select NORMAL.

7.  Repeatedly press SEL /\ or SEL \/ to adjust the picture as desired then
    press SET.

8.  Repeat Steps 6 and 7 to adjust the other settings(s) as necessary.

9.  Press MENU three times to exit this mode.

    NOTE:  If you do not press any button within 5 minutes, the picture
           setting screen disappears.

USING MUTE

To temporarily turn off the TV/VCR's sound, press MUTE on the remote control.  MUTE appears on the TV screen.

To restore the sound to the previous level, press MUTE again.  To restore
the sound and change its level, press VOL - or +.

USING LAST CHANNEL RECALL

The TV/VCR's last channel recall function lets you quickly switch between
two channels you tuned.

Repeatedly press LCR. (Last Channel Recall) on the remote control to switch
between the channel you are watching and the previous channel you tuned.

NOTE:  When you select channels using CH /\ or CH \/, you must wait at least
       4 seconds after you select a channel before you can press CLR to
       select the last channel.


(BR/EB 10/17/96)

Privacy Policy