Model 32 VHS Video Cassette Recorder
(160-0702)                   Operation               Faxback Doc. # 26340


PROGRAMMING TUNER MEMORY POSITIONS

1.  Press POWER so the the POWER indicator lights.

2.  Press the TV/VCR button so that VCR appears on the display.

3.  Set the TUNING switch to the desired band- VHF/CATV or UHF.  The
    display changes from channel tag numbers to memory posiition numbers
    and CH flashes.

4.  Press one of the CHANNEL buttons (right arrow or left arrow) until
    the desired memory position number is displayed.  If the position
    number flashes along with CH, the tuner is set to skip that position.

5.  Press the + or - button until the desired channel is received.
    Continue using the buttons to tune the picture as clearly as
    possible.

6.  Set the TUNING switch to the OFF (center) position.  The display
    changes from memory position numbers to channel tag numbers, and CH 
    stops flashing.

7.  Use the LEFT NO and RIGHT NO buttons to select the channel tag
    number.  To program cable channels, you press the CATV button, so
    that CATV appears on the display.  RadioShack suggests that you make
    the tag number the actual channel number used by the TV station or
    cable company.

8.  Press MEMORY to store the channel tuning and channel tag number in
    memory.

9.  Repeat Steps 3 through 8 to program additional memory positions.


(IR-10/18/96)

Privacy Policy