RCA ProV712 / PRO 8 Camcorder
(160-0867)                 Optional Accessories       Faxback Doc. # 34801

We invite you to take a look at some great ideas for sparking creativity
and adding to the fun of using your Camcorder.  These accessories are
designed to make the process of recording and watching your videos more
enjoyable.

To order accessories, contact your local Dealer. If a dealer is not nearby,
all accessories are available through toll-free ordering. 

BB45 and BB50 Battery Packs

These rechargeable batteries are designed specifically for long life.  The
BB45 is the same battery that came packed with your camcorder.  The BB50
is an extended battery pack.  Both can be recharged with the AC adapter/
charger that came with your Camcorder.

SUN102 Sun Hood

This sun hood helps protect the lens from strong sunlight when recording on
a bright sunny day.

SDC100 Car Battery Adapter

This car battery adapter enables you to operate your Camcorder from your
car, truck, or RV by plugging the car cord directly into the vehicle's
cigarette lighter socket.  The SDC 100 is designed specifically to convert
power from only a 12-volt or a 24-volt negative ground car battery to a 4.5
volt output.

CAUTION:  Do not use any other car battery adapter with Camcorder.

Using the Optional AC088 Tripod

Mounting the Camcorder on a tripod, such as AC088, will keep the camcorder
steady and produce excellent video results.

This tripod's fluid-effect head provides smooth camera pan and tilt.  The
quick-release mount makes it easy to attach or remove the Camcorder.  The
grooved, tubular 3-section leg design folds down to 26 inches when not in
use.  Rubber feet allow for sure footing.

CAUTIONS:  Before using a tripod, make sure it is stable enough to hold the
           Camcorder without falling over.  Do not transport the Camcorder
           attached to the tripod.

           When attaching your Camcorder to a tripod, be careful not to
           force the tripod screw into the Camcorder's tripod mounting hole.

           The tripod screw should not protrude into the camcorder more than
           approximately three-eighth (3/8) inch.  Forcing the screw could
           damage the mounting hole on the bottom of the camcorder.


(BR/EB 9/25/96)

Privacy Policy