RCA ProV712 / PRO 8 Camcorder
(160-0867)                 Connections                Faxback Doc. # 34800

Although you can enjoy playback on the Camcorder's LCD monitor screen, you
can also watch tape playback on your TV screen.

Connection to a TV

1.  Connect the Camcorder to your TV with the supplied audio/video cable.
 
2.  Set the TV to its "AV" or "VIDEO" channel.  (See the operation manual
    for your TV.)

CAUTION:  Make sure that the Camcorder, TV and other equipment to be
          connected have been turned off before you make connections. Making
          connections with any of the components left turned on may cause
          picture noise or malfunction.

NOTE:  When the Camcorder is connected to a TV for playback, the picture on
       the TV screen may flicker if the volume on the Camcorder is set to
       maximum.  Should this occur, turn the volume down (see Faxback Doc.
       # 34798).

Connection to a TV through a VCR

1.  Connect the Camcorder to your VCR with the supplied audio/video cable.
   
2.  Set the VCR to its "LINE" or "VIDEO" input channel.  Operate the TV as
    you normally do to see the signal from the VCR.  (See the operation
    manuals for your TV and VCR.)

Automatic Switching of the Audio/Video Jack's Input/Output Mode

The AUDIO/VIDEO jack mode is normally set to input.  It automatically
switches to output when the Camcorder is playing back.


(BR/EB 9/25/96)

Privacy Policy