MODEL 49 4-Head VHS Stereo Hi-Fi VCR
(160-0619) Troubleshooting Faxback Doc. # 33724
If you follow the instructions in this manual and still have trouble
operating your VCR, refer to the following troubleshooting chart.
SYMPTOM POSSIBLE CAUSE CORRECTIVE ACTION
No power. The power cord is not Plug the power cord
connected. into an AC outlet.
Timer recording is The program timer is Set the program timer
not possible. not set or set correctly.
incorrectly.
The power is on. Turn off the power.
Record mode cannot The erase-protection Place a piece of plastic
be engaged. tab is missing. tape over the tab hole.
Picture is poor The TV channel selector On playback, set the TV
on playback. is not set to the proper channel selector to
channel. Channel 3 or 4.
The TV fine tuning is not Fine tune your TV.
set correctly.
Audio/video connections Double check all
are incorrect. connections.
Video distortion The video head is dirty. Have the video head cleaned
on playback.
The tracking is not Adjust the tracking for a
properly adjusted. a better picture.
No picture on The TV is not set to the Set it to the correct
playback. proper channel. channel (Channel 3 or 4).
Audio/Video connections Double check all connec-
are incorrect. tions.
Operation buttons The dew sensor is Wait until the sensor is
do not work when activated. deactivated, and then
the power is on proceed with operation.
and the cassette
is inserted. The safety device in Try to press EJECT on the
your VCR is functioning. VCR several times.
Unplug the VCR and plug
it in again after one
full minute.
Off-the-air TV The connections are not Recheck the connections.
programs cannot correctly made.
be seen.
(BR/EB 6/26/96)
Privacy Policy