Model 801
(160-0655)                  Operation                  Faxback Doc. # 31378

Programming Channels into Memory

You can program the tuner's memory so that when you press CHANNEL up arrow
or down arrow, the VCR's tuner scans only the active channels in the area.
Use the remote control to program the tuner's memory.

1.  Turn on the VCR and the TV.

2.  Select the tuner band you want to program.

3.  Press A.PROG.  The VCR scans all the channels in your area and stores
    active channel numbers into memory.  Then the VCR stops on the lowest
    memorized channel.

4.  Press CHANNEL up arrow or down arrow to check the memory's contents.
    The memorized channel numbers appear on the VCR's display window.

Adding or deleting a channel

If the tuner stores a channel that you do not want, tune to that channel
and press ERASE.  The channel is now removed from memory.  If you want to
program a weak channel that automatic programming missed, enter that
channel number using the remote control's number buttons.  Then press ADD.
The channel is now added to memory.


(IR-03/20/96)

Privacy Policy