Model 130 Moviecorder
(160-0830)                 Accessories                Faxback Doc. # 19851

Your camcorder includes the following accessories.  Be sure to remove these
items before you store the packing material.

        Battery Pack - Supplies power for recording and playback during
                       portable operation.

  AC Adapter/Charger - Charges the battery or, when used with the auxiliary
                       power cord, supplies power to the camcorder from an
                       AC outlet.

Auxiliary Power Cord - Lets you connect the camcorder to the AC
                       adapter/charger to operate the camcorder from AC
                       power.

      Shoulder Strap - Provides a convenient way to carry the camcorder.

Optional Accessories

DC Adapter (RadioShack CMC No. T16-CC70A)

    Supplies power to the camcorder from your vehicle's battery.  Use it
    only in vehicles that have a 12-volt negative-ground electrical system.

RF Adapter Kit (CMC No. T16-RF80A)
    Lets you play back a tape from the camcorder through a TV that does not
    have separate audio/video input jacks.  The RF adapter kit includes:

    - One RF converter

    - One 300- to 75-ohm matching transformer

    - One 75-ohm antenna cable

Spare Battery Pack (CMC No. T16-BP67)

Telephoto/Wide Angle Lens (CMC No. 15-2339)

    46 mm Filter Kit

Moisture Condensation

When you move the camcorder from a cold area to a warm, humid area,
moisture might condense inside the camcorder.  Condensation can cause the
tape to stick to the video head inside the camcorder, causing the tape to
jam and possibly damaging the video head.

When you first use your camcorder after moving it from a cold area to a
warm one, follow these steps:

1.  Eject the tape if one is installed.

2.  If necessary, slide POWER to OFF.

3.  Let the camcorder sit for 2 - 3 hours before you begin operation.

CAUTION:  Avoid using the camcorder in excessively humid areas.


(EB 2/23/96)

Privacy Policy