Model 163 Moviecorder 8 Camcorder
(160-0864)                 Accessories                Faxback Doc. # 19171

BEFORE YOU BEGIN

Please read this owner's manual carefully.  It has been prepared to help
you with initial setup procedures and in the everyday operation of your
camcorder.

SUPPLIED ACCESSORIES

Your camcorder includes the following accessories.  Be sure to remove these
items before you store the packing material.

Battery Pack - supplies power for recording and playback during portable
               operation.

AC Adapter/Charger - charges the battery or, when used with the auxiliary
                     power cord, supplies power to the camcorder from an
                     AC outlet.

Audio/Video Cable - lets you connect the camcorder to the A/V input jacks
                    of a TV/monitor or VCR.

Auxiliary Power Cord - lets you connect the camcorder to the AC adapter/
                       charger to operate the camcorder from an AC outlet.

Date/Calendar Battery - protects the camcorder's memory.

OPTIONAL ACCESSORIES

DC Adapter (Radio Shack CMC No.  T16-CC80A, Radio Shack Unlimited No. 
11449188) - When used with the auxiliary power cord, supplies power to the 
camcorder from your vehicle's battery.

RF Converter (CMC No. T16-RF86A, Radio Shack Unlimited No. 11449238)-lets 
you play back a tape from the camcorder on a TV that does not have separate
audio/video input jacks.

Spare Battery Pack (CMC No. T16-BP84, Radio Shack Unlimited No. 11449162)

Remote Control (CMC No. T16-RME55A, Radio Shack Unlimited No. 11449246)
lets you operate the camcorder's functions from a distance.

A/V Input Cable (CMC No. T16-CH90IN, Radio Shack Unlimited No. 11449196)
lets you connect the camcorder to the A/V output jacks of a VCR.

Telephoto/Wide Angle Lens (CMC No.  16-2339, Radio Shack Unlimited No.
10508000)

46mm Filter Kit (CMC No. T16-46MM, Radio Shack Unlimited No. 10101889)

Synchro Edit Cable (CMC No. T16-CH95, Radio Shack Unlimited No. 11449204)

DC Light (CMC No. T16-CP4, Radio Shack Unlimited No. 11449212)

Bulb for DC light (CMC No. T16-CP4L) 

Moisture Condensation

When you move the camcorder from a cold area to a warm, humid area,
moisture might condense inside the camcorder.  TAPE flashes in the
viewfinder if the camcorder detects condense moisture.  Condensation can
cause the tape to stick to the video head inside the camcorder, causing the
tape to jam and possibly damaging the video head.

If TAPE flashes in the viewfinder or when you first use your camcorder
after moving it from a cold area to a warm one, follow these steps.

1.  Eject the tape if one is installed.

2.  If necessary, slide VCR/OFF/CAMERA to OFF.

3.  Let the camcorder sit for 2-3 hours before you begin operation.

CAUTION:  Avoid using the camcorder in excessively humid areas.


(JC/all-02/16/96)

Privacy Policy