| Question: How do I program this telephone? |
Answer: To program the Nokia 636, follow these steps:
- At the normal operating screen, enter *3001#12345. Then press MENU.
- Press the down arrow key. The display will show STORE TO MEMORY.
- Press OK. Display will show NAME?
- Press OK. Display will show STORE TO 1?
- Press 00 (zero zero). Display will show STORE TO 00.
- Press OK. Display will show NOT STORED.
- Enter the emergency number and lock code information 911#*911#0*XXXX and then press MENU.
(Emergency number 1#* emergency number 2# Language Code * Lock Code)
(The Lock Code can be any four digit number.)
- Press the down arrow key. The display will show STORE TO MEMORY.
- Press OK. Display will show NAME?
- Press OK. Display will show STORE TO 1?
- Press 00 (zero zero). Display will show STORE TO 01.
- Press OK. Display will show NOT STORED.
- Enter the 10 digit cellular number and then press MENU.
- Press the down arrow key. Display will show STORE TO MEMORY.
- Press OK. Display will show NAME.
- Press OK. Display will show STORE TO?
- Press 02. Display will show STORE TO 02?
- Press OK. Display will show STORED.
- Enter the system information XXXXX*1*1*XXX*10*10 and then press MENU.
(System ID*1*1*Page Channel*Access Overload*Group ID)
Example: 00175*1*1*333*10*10 MENU
- Press the down arrow key. Display will show STORE TO MEMORY.
- Press OK. Display will show NAME?
- Press OK. Display will show STORE TO?
- Press 03. Display will show STORE 03?
- Press OK. Display will show STORED.
- Turn the telephone off and then back on. The telephone should display the cellular Number.
Back to Cellular Index
|
| Question: Is there additional information available on-line? |
Answer: Additional information is available on our on-line support page for this product.
Back to Cellular Index
|
About RadioShack Corporation | Contact Us | Privacy Policy | Store Locator
Copyright© RadioShack Corporation 2004. All rights reserved.
|