490-2011 Wireless Alarm System Questions

Question: How do I set this up to learn the motion sensor?

Answer: Follow the steps below:

Press LEARN on the base. The LEARN indicator flashes.
Enter your access code on the base's keypad. The base sounds an ascending tone, the LEARN indicator lights steadily, and the indicator for the next unassigned zone flashes.
Note: If you do not enter the code within 14 seconds, a tone sounds and the base exits the Learn mode.
Enter the zone number you want to assign the device to. For example, press 01 to assign the device to Zone 1.
Press PANIC/TEST on the door/window transmitter (or TEST on the motion sensor). The system stores the device's settings in the selected zone. The indicator for the selected zone lights steadily and a brief tone sounds to confirm the addition of the device (when the tone sounds your device has been learned by the base). The indicator for the next unassigned zone flashes.
Press CANCEL on the base to exit the learn mode.

Back to Index

Question: Which auto dialer can be used with this system?

Answer: You can use the 490-0434 auto dialer with this system.

Back to Index

Question: Can I use a smoke detector with this system?

Answer: This security system offers the ability to detect a smoke detector. It listens for the frequency of the smoke detector going off, and responds accordingly.

Back to Index

Question: Can I use an external siren with this system?

Answer: Yes. This security system has external siren hookups.

Back to Index