product    
260-0762 Support Index

 Compaq® Wireless Keyboard & Optical Mouse (Cat. No. 26-762)

Question: How do I connect my keyboard and mouse?

Answer:
Follow the steps below to connect your keyboard and mouse:
  1. Connect the charger / receiver's USB cable to your computer's USB port.
  2. Press CONNECT on the receiver. The receiver's indicator lights green.
  3. Press the Connect button on the back of the mouse. The indicator on the receiver turns off if the connection is successful.
  4. Press CONNECT on the receiver. The receiver's indicator lights green.
  5. Press CONNECT on the keyboard. The indicator on the receiver turns off if the connection is successful.

When you change the channel on the mouse, repeat steps 2 and 3. When you replace the batteries, you may need to repeat the above connection steps.

Back to 26-762 Support Index
 

Question: Where is the reset button that the manual refers to?

Answer:
There is no reset button on the back of the keyboard; a step was left out of the manual. You should use the steps above to connect your keyboard and mouse.

Back to 26-762 Support Index
 

Question: Is there additional information available on-line?
 
Answer
: Additional information is available on our on-line support page.

Back to 26-762 Support Index
 


About RadioShack Corporation | Contact Us | Privacy Policy | Store Locator

Copyright© RadioShack Corporation 2004. All rights reserved.