200-0521 PRO-91 150-Channel Handheld Trunk-tracking Scanner

Question: Why do I get 2 beeps when trying to enter a preset fleet map?

Answer: You will get two beeps if you are not in the trunk mode. Be sure to press TRUNK until it flashes on the display.

Radio Communications FAQ Index

Question: I get an error every time I try to program in an ID.

Answer: Make sure that you do not already have that ID programmed. If you try to enter an ID that is already programmed, you will get an error.

Radio Communications FAQ Index

Question: What are the intermediate frequencies (IF)?

Answer: The three intermediate frequencies are 380.7 MHz, 10.85 MHz and 450 KHz.

Radio Communications FAQ Index

Question: When trying to use the E1 fleetmap, E2 flashes and I can't access E1 - what is E2?

Answer: E2 is indicating that you need to try a different fleetmap.

Radio Communications FAQ Index

Question: What is the expected battery life?

Answer: When using receiving constantly, you can expect between three and four hours of battery life.

Radio Communications FAQ Index

Question: What does this scanner use for memory backup and how long will it retain the memory?

Answer: The memory is saved on an EEPROM chip and will last as long as the chip lasts. It is not dependant on a power source.

Radio Communications FAQ Index

Question: How do I turn off hyperscan?

Answer: You can only switch between normal and hypersearch during a LIMIT SEARCH or DIRECT SEARCH within 29-54 MHz or 137-174 MHz. Once you are in limit or direct search within one of these bands, press H/S to change the search speed.

Radio Communications FAQ Index

Question: Is there additional information available on-line?

Answer: Additional information is available on our on-line support pages for the 200-0521 and the 200-0521A.

Radio Communications FAQ Index