200-0219 DX-392 Shortwave Radio

Question: What is the plug size on the power adapter?

Answer: The plug size is 3.5 mm.

Back to Shortwave FAQ Index

Question: How do I connect the shortwave antenna kit (Cat. No. 278-758) to this radio?

Answer: You need to connect an 1/8" mono phone plug (Cat. No. 274-868) to the antenna wire.

Back to Shortwave FAQ Index

Question: How do I turn the alarm off?

Answer: To turn off the alarm, you will need to press Standby, and then, while Standby flashes, press the C button.

Back to Shortwave FAQ Index

Question: The instructions say to ground the receiver but there is no ground screw on this unit.

Answer: In this case, you would need to ground the cable instead of both the cable and the receiver.

Back to Shortwave FAQ Index

Question: How do I turn off the beep when changing frequencies?

Answer: This is not an option; the beep cannot be turned off.

Back to Shortwave FAQ Index

Question: The AM external antenna is not working when it is plugged in.

Answer: Be sure that the adapter tip and ring are not wired in reverse. The correct wiring is with the tip wired to the conductor and the sleeve (or ground) wired to ground. Information on phone plug wiring is available on the phone connector answers page.

Back to Shortwave FAQ Index

Question: Is there additional information available on-line?

Answer: The user's manual for this product is available on-line.

Back to Shortwave FAQ Index