190-1210 Business Band Mobile Transceiver w/CTCSS/VHF-FM

• 151.820 MHz
• 151.880 MHz
• 151.940 MHz
• 154.570 MHz
• 154.600 MHz

Our 190-1210 and 190-1210 (mobile version) radios can easily be programmed for four of those frequencies.

1. Turn VOLUME fully counterclockwise (transceiver OFF).
2. Remove the battery door, but do not remove the battery (battery must have some charge).
3. Choose a preset frequency from the chart below and set the encoder DIP switches to match the desired frequency.
4. Turn the radio on and the new frequency is set.
5. To set the second frequency in the 190-1210, flip the frequency switch and repeat steps 1-4 above.

DIP Switches

D = down or OFF; U = up or ON

For the 190-1217:

Selecting A Business Band Frequency:

1. While holding PUSH TO TALK, turn on the transceiver. You hear "frequency" and the current frequency setting ("frequency nine," for example).
2. Choose a business band frequency from the following table:

   Frequency	You Hear:
   151.625 MHz	One
   151.955 MHz	Two
   154.570 MHz	Three [MURS channel (blue dot)]
   154.600 MHz	Four [MURS channel (green dot)]
   151.700 MHz	Five
   151.760 MHz	Six
   151.820 MHz	Seven [MURS channel (no dot)]
   151.880 MHz	Eight [MURS channel (no dot)]
   151.940 MHz	Nine [MURS channel (no dot)]

3. Repeatedly press PUSH TO TALK to scroll through the transceiver's business band frequencies. When you hear the business band frequency you have a license to use, release PUSH TO TALK.
4. Press MONITOR twice to store the frequency.

Radio Communications FAQ Index
 

Radio Communications FAQ Index