Turn the scanner off by rotating VOLUME all the way to OFF, then turn it on again.
Note: The image shows the top of the scanner with the antenna removed.
Step 2: Press the Reset Button
Insert a pointed object such as a straightened paper clip into the Reset opening on the side of the scanner, then gently press the Reset button inside the opening.
Note: If the scanner still does not work properly, you should try to Initialize the Scanner.
How to Initialize the Scanner
Important: This procedure clears all information you stored in the scanner's memory. Initialize the scanner only when you are sure the scanner is not working properly or when you want to quickly erase all information.
Step 1: Turn the Scanner Off and On
Turn the scanner off by rotating VOLUME all the way to OFF, then turn it on again.
Step 2: Selecting Initialize Mode
Hold down MON/CL. The display will show a channel in manual mode.
Step 3: Press the Reset Button
While holding down MON/CL, insert a pointed object (such as a straightened paper clip) into the reset opening on the side of the scanner, then gently press the reset button inside the opening. The display should turn off.
Step 4: Clearing All Memory
When the display turns on again, release MON/CL. The display should show the first channel empty, as above.
Note: You must release the reset button before releasing MON/CL; otherwise the memory might not clear.
