product    
Audio Guide Index
General Audio
Troubleshooting
Guide
General FAQ
Connectors
Identification
Terms
Visual Guide
Connector FAQs
Cables
Terms
Visual Guide
Premade Cable FAQs
Bulk Cable FAQs
Home System
Components
Home Players and
Recorders
Portable Players and
Recorders
Public Address and DJ
Equipment
Audio Accessories
Car Audio
 

 Audio Recording Solutions

 Problem: The tape deck doesn't record anything.

 Possible Cause

Suggested Solution
The connections between the tape deck and the amplifier's L and R TAPE OUT jacks are incorrect or loose. Turn off the amplifier and correct the connections.
The source selector is set to the wrong audio source. Set the selector to the source you want to record.
Back to the Troubleshooting Index
 
 Problem: The tape deck records the signal, but there's a lot of static that was not on the original.

 Possible Cause

Suggested Solution
Line noise is feeding in from the tape deck's power cord. Use an AC line filter (such as Cat. No. 15-1111) to block the line noise.
RF (radio frequency) interference is being picked up by the tape deck's power cord. Remove sources of RF interference, such as fluorescent lighting or wireless devices not designed to work with audio/video equipment.
Back to the Troubleshooting Index
 
 Problem: Recorded tapes won't play in other players, but play back fine in the recorder/player I used to record them.

 Possible Cause

Suggested Solution
The recorder may be out of alignment. Take the recorder to your local RadioShack store and have it sent to service.
Back to the Troubleshooting Index
 
 Problem: The recorder plays the tape back too fast; the tape plays fast on other tape players also.

 Possible Cause

Suggested Solution
The recorder may be out of alignment. Take the recorder to your local RadioShack store and have it sent to service.
Back to the Troubleshooting Index
 
 Problem: When I record using my microphone I hear "pops" and 'hissing" when listening to the playback.

 Possible Cause

Suggested Solution
May be vocally induced distortion caused by consonants like "b" or "t" and "s". Use a windscreen on the microphone to prevent or reduce "popping" and "sibilance".
Back to the Troubleshooting Index
 

About RadioShack Corporation | Contact Us | Privacy Policy | Store Locator

Copyright© RadioShack Corporation 2004. All rights reserved.