| Return to How to Set Up for Surround Sound
The dual mono setting can only be used when listening to Dolby Digital™ discs that have dual mono software encoded in them. As of now these are not that widely used. With this setting you want to listen to. Thus, it is useful for soundtracks that have one language on one channel and a different language on the other. Remember you can only use this setting if you have Dolby Digital™ software with this feature and want to isolate one of the channels therein.
There are two different ways to route the sound in the dual mono setting; one is with Dolby Digital™ mode on, the other with Dolby Digital™ mode off. If Dolby Digital™ mode is switched on, the ch1 setting will play channel 1 through your center speaker. The ch2 setting will play channel 2 through your center speaker. With Dolby Digital™ mode off, the dual mono sound routing is as follows: In the ch1 setting you will hear channel 1 out of both front speakers. In the ch2 setting you will hear channel 2 out of both speakers. In the L. c1 R. c2 setting the speakers will play the soundtrack independently of each other. The left front speaker will play channel 1 and the right front speaker will play channel 2.
Press the UP or DOWN arrow keys to cycle through the possible DUAL MONO settings.
Note:
- The default setting of this feature is ch1.
|
