| Return to How to Set Up for Surround Sound
This setting establishes the size and configuration of the speaker system you have connected. For example, here you set whether you have connected surround speakers or not, and how big they are. Selecting "Large" or "Small" will determine how much bass is sent by the receiver to the speakers being set. In the display, F, C, and S refer to front, center, and surround speakers respectively. Speaker size is denoted as L for large speakers, S for small speakers, and " * " (asterisk) if no speaker is connected.
Note: If the cone size (diameter) of the speaker is larger than 5 inches, please set to Large.
Choose a speaker setting mode according to the speakers you have hooked up. Use the UP or DOWN arrow keys. The configurations shown below will appear in the display on the front of the receiver. One of them should match your speaker set up. Cycle through the different possibilities until you find the one that matches your set up.
Press the RIGHT arrow key to advance to the next receiver setting, and press the LEFT arrow key to return to a previous receiver setting.
Return to Top of Page |
