48K Electronic Organizer w/Backlit Display
(650-0766) Preparation Faxback Doc. # 51347
Before You Begin
Removing The Insulation Strips
Before you can use the organizer, you must remove the two protective
insulation strips from inside the battery compartment. To remove the
slips, gently pull them out in the direction of the arrows.
Turning The Organizer ON and OFF
Press ON/OFF to turn on the organizer. Press ON/OFF again to turn it off.
To conserve battery power, the organizer automatically turns off about 6
minutes after you stop using it.
Turning The Key tone ON and OFF
You can set your organizer so a tone sounds each time you press a key.
With the organizer turned on, press (musical symbol)(V) to turn the tone
on or off. A beep sounds. (musical symbol) appears when the key tone is
on.
Note: You can only turn the key tone on or off when the display shows the
current date and time.
Using The Backlight
To turn on the illuminator backlight for about 20 seconds, press (light
bulb symbol). To turn it off before it turns off automatically, press
(light bulb symbol) again.
Clock/Calendar
Setting/Viewing the Home Date and Time
1. Turn on the organizer, then press PROG. The seconds digits flash.
2. Press SEARCH /\ or \/ until your city's abbreviation appears. If your
city is not listed, use a city in the same time zone as yours.
CODE CITY NAME CODE CITY NAME
LON London HKG Hong Kong
RIO Rio de Janeiro BKK Bangkok
CCS Caracas RGN Rangoon
YYZ Toronto DAC Dhaka
NYC New York DEL Delhi
CHI Chicago KHI Karachi
DEN Denver KBL Kabul
LAX Los Angeles DXB Dubai
ANC Anchorage THR Tehran
HNL Honolulu RUH Riyadh
WLG Wellington MOW Moscow
NOU Noumea CAI Cairo
SYD Sydney HEL Helsinki
ADL Adelaide ROM Rome
TYO Tokyo BER Berlin
SIN Singapore PAR Paris
3. Press >. The first digit of the year flashes.
4. Use the number keys to enter the year, month, and date on the first
line. Then enter the current hour and minute on the second line.
Note: If you make a mistake, press < or > to move backward or forward
to the digit you want to change. Then enter the correct digit.
5. Press 12/24 (Z) to set the clock to the 12- or 24-hour format.
In the 12-hour format, AM or PM appears. Press AM/PM (X) to choose AM
or PM.
6. To select daylight saving time, press DST (C). (lighted dot) appears.
Press DST again to turn daylight saving time off.
7. Press ENTER to store the date and time. The day of the week
automatically appears.
Note: If any information you entered is invalid (for example, you
entered 25 for the hour), the first incorrect digit flashes
after you press ENTER. Enter the correct digit, then press
ENTER again.
If you are in another mode and want to view the home date and time, press
TIME (clock symbol).
(EB 2/5/99)
Privacy Policy