EC-238 10K Electronic Organizer w/3-Phone Directories
(650-0764)                 Security                   Faxback Doc. # 51176

Security Code

The security code lets you block unauthorized access to certain phone, 
schedule alarm, memo, and to-do records.

Once you lock a record and set a security code, you must enter the code 
before you can recall any of the locked records.

CAUTION:  Be sure to use a code you can remember (such as your mother's
          birthday) and perhaps write it down in a safe place.  If you
          forget the code, you cannot access the locked records.  All you
          can do is clear the code along with all your stored information
          (see "initializing the Organizer" in Faxback Doc. # 51173).

Note:  The organizer automatically turns off if you do not press a key
       within the selected power-off time (from 1 to 9 minutes).  Even if
       you selected a locked record before the organizer turned off, you
       must enter your security code to access that record again.

Locking a Record

1.  Recall the phone, schedule alarm, memo, or to-do record you want to
    lock.

2.  Press EDIT.  EDIT appears at the bottom of the display.

3.  Press SHIFT then MARK (N).  [*] appears to show the record is locked.

    To unlock the record, press SHIFT then MARK again.  [*] disappears.

4.  Press SAVE to store this setting.

Setting and Using The Security Code

To set the security code and to access locked records, follow these steps.

1.  Press (phone symbol), (schd symbol), or (note sheet symbol).  EDIT
    appears at the bottom of the display.

2.  press SHIFT then (key symbol) (S).  PASS-WORD? appears.

3.  Enter the security code, up to 8 digits.

    Note:  INS does not function while you enter the security code.  If
           you leave out a digit, press < to move to the beginning of the
           code, then type the code again.

4.  Press ENTER.  (key symbol) appears to show the security code has been
    entered and all records, including locked records, can be recalled and
    viewed or edited.

If the organizer is off when a locked schedule alarm sounds, press ON/OFF, 
then SCHED.  EDIT appears at the bottom of the display.  Press SHIFT (key 
symbol).  PASS-WORD? appears.  Enter the password then press ENTER.  Press 
/\ to view the record for the alarm that just sounded.

Note:  For ongoing security, you can change the security code at any time
       (see "Changing the Security Code", below).

Changing The Security Code

1.  Press (phone symbol), (schd sheet symbol), or (note sheet symbol).
    EDIT appears at the bottom of the display.

2.  Press SHIFT then (key symbol).  PASSWORD? appears.

3.  Enter the security code, then press ENTER.

4.  Press SHIFT then (key symbol) again.  PASSWORD? appears.

5.  Enter the new security code, then press ENTER.

Canceling The Security Code

1.  Press (phone symbol), (schd sheet symbol), or (note sheet symbol).
    EDIT appears at the bottom of the display.

2.  Press SHIFT then (key symbol).  PASSWORD? appears.

3.  Enter the security code, then press ENTER.

4.  Press SHIFT then (key symbol) again.  PASSWORD? appears.

5.  Press ENTER.  (key symbol) disappears.

(EB 1/22/99)
(EB - Rev. 3/15/99)