EC-237 Card-Size Electronic Organizer with Telephone Directory
(650-0763)                 Security                   Faxback Doc. # 49913

SECURITY CODE

The security code lets you block unauthorized access to directory and
schedule alarm records.

Once you set the security code, all stored records are locked.  You must
enter the code before you can store or recall a record.

CAUTION:  Be sure to use a code you can remember (such as your mother's
          birthday) and perhaps write it down in a safe place.  If you
          forget the code, you cannot access the directory or schedule
          alarm records.  All you can do is clear the code along with all
          your stored information (see "Clearing the Organizer's Memory"
          in Faxback Doc. # 49915).

Note:  The organizer automatically turns off if you do not press a key for
       about 4 minutes.  Even if you selected a record before the
       organizer turned off, you must enter your security code to access
       that record again.

SETTING THE SECURITY CODE

1.  Press [TIME/ALARM] (if necessary) so the date/time display appears.

2.  Press [Key Symbol]/[.].  LOCK and - - - - appear.

3.  Enter any four-digit combination for your security code, except 0000
    which has been preset for canceling the security code (see "Canceling
    the Security Code", below).  If you enter 0000, your records will not
    be locked.

    Be careful when setting the security code.  If you accidentally enter
    a number that is not what you want to use, press [ERASE] so the number
    disappears.  Then enter the correct number.

4.  To store the security code you entered, press [SET].  The current date
    and time appear, along with (Key Symbol) showing that all directory
    and schedule alarm records are locked.

    To exit without storing the security code you entered, press
    [TIME/ALARM] to return to the date/time display.

Once you set the security code, (Key Symbol) appears during all functions
to remind you that your records are locked.  When you press [Phone Symbol]
or [Page Symbol], LOCK and - - - - appear.  Enter the correct code to
access your directory or schedule alarm records.  (Key Symbol) disappears.

Note:  For ongoing security, you can change the security code at any time
       (see "Changing the Security Code", below).

CHANGING THE SECURITY CODE

1.  Press [TIME/ALARM] (if necessary) so the date/time appears.

2.  Press [Key Symbol]/[.].  LOCK and - - - - appear.

3.  Enter the current security code.  (Key Symbol) disappears then
    LOCK, - - - -, and Input appear.

4.  Enter a new four-digit security code.

5.  To store the security code you entered, press [SET].  The current date
    and time appear, along with (Key Symbol) showing that all directory
    and schedule alarm records are locked.

CANCELING THE SECURITY CODE

Follow these steps to erase the currently-stored security code without
storing another.

1.  Press [TIME/ALARM] (if necessary) so the date/time display appears.

2.  Press [Key Symbol]/[.].  LOCK and - - - - appear.

3.  Enter the current security code.  (Key Symbol) disappears then
    LOCK, - - - -, and Input appear.

4.  Enter 0000 then press [SET].  Or press [TIME/ALARM].

(LB/tlc 10/22/98)

Privacy Policy