EC-324 Card-Size Data Bank
(650-0941)                 Operation                  Faxback Doc. # 48860

Complete the following steps to set the date and time.  To simply view the
date and time, complete only Steps 1 and 2.

1.  Press [TIME].  The current settings for date and time appear.

2.  Press and hold [12/24] for about two seconds to change the clock
    format to a.m./p.m. or military format.  (In the a.m./p.m. format, 'A'
    or 'P' appears in the lower left corner of the display.)

3.   Press [SET] to change the date or time.  The cursor appears below the
    date's first digit.

4.  Enter the date.  If you selected the a.m./p.m. format, enter the month
    first.  If you selected the military format, enter the day of the
    month first.  For example, enter March 5 as:

    a.m./p.m. format:    03/05
    military format:     05/03

5.  Enter the hour and minutes.  For example, enter 1:00 p.m. as:

    a.m./p.m. format:    01-00
    military format:     13-00

    After you enter the time, the cursor returns to the date's first digit.

6.  In the a.m./p.m. format, press [A] or [P] to set the clock to a.m. or
    p.m.

7.  Repeatedly press [DAY] to set the day of the week.

8.  When the correct date and time are displayed, press [SET] to store the
    date and time.

NOTE:  If the information you enter is invalid (for example, you enter 15
       for the month), the display returns to the previous date and time
       setting, and the cursor returns to the date's first digit.

(CC/wr 07/29/98)