EC-394/EC-399 Pager ID Data Organizer
(650-0729/30)              Preparation                Faxback Doc. # 46218

Before Using The Organizer

Important: Your organizer's electronic memory stores and recalls 
           information quickly and easily.  However, the organizer retains
           information only as long as power is supplied by the batteries.
           If the batteries die, or if you remove both batteries at the 
           same time, data stored in memory might be lost entirely.  Data
           can also be corrupted or lost due to a strong electrostatic
           charge, strong impact, or extremes in temperature and humidity.
           All of this means that you should always keep written back-up
           copies of important data.

How This Manual is Organized

The organizer lets you use three different types of records:  telephone,
memo, and schedule.  The sections of this manual that describe how to 
store and maintain those records are organized like this:

  To Store A Record

  Each record type has its own section to describe how to enter and store
  that type of record.  For example, you can find out how to store a
  telephone record by looking in "Telephone Directory" in Faxback Doc. 
  # 46221.

  To Maintain A Record

  Since the instructions on how to maintain (recall, edit, copy, delete)
  all record types are the same, this information is grouped together in
  sections under "Maintaining Stored Records" in Faxback Doc. # 46222.
  So, for example, you can find out how to edit a telephone, memo, and
  schedule, record all in one section by looking in "Editing a Stored 
  Record" in Faxback Doc. # 46222.

Opening/Closing The Cover

The organizer's keys and display are protected by a cover to prevent 
damage or unwanted input.  To open the cover, press the tab on the front
of the organizer and lift up the cover.

To close the cover, press it down until it locks into place.

Resetting The Memory

You must reset the organizer's memory before you use it the first time.
You can also reset the memory at any time to clear all records you have
already stored, or if the organizer is not working properly.

Note:  If the display does not work properly, try adjusting the display
       contrast first before you reset the memory.  See "Adjusting the
       Display Contrast" below.

CAUTION:  Resetting the organizer deletes all stored information!

1. Insert a pointed object, such as a straightened paper clip, into the
   RESET hole on the back of the organizer, then press it gently.  RESET
   Y/N? appears on the display.

2. To reset the organizer, press Y.  RESET ! then the main menu screen
   appears.

   To return to the previous function without resetting, press N.

Adjusting The Display Contrast

The first time you use the organizer, or when you reset the organizer's
memory, you might need to adjust the display contrast to see the display.

1. Press CONT. CONTRAST /\ HIGH \/ LOW appears.

2. Hold down or repeatedly press /\ to make the contrast darker, or \/ to
   make it lighter.

3. Press any key other than /\, \/ Arrow, or OFF to return to the previous
   function.

Selecting a Function

The main menu appears when you turn on the organizer and lets you select
any of the organizer's nine functions.  To return to the main menu at any
time, press [MENU].

Follow these steps to turn on the organizer and select a function.

1. Press ON to turn on the organizer.  The icon for the previously 
   selected function is highlighted.

2. Repeatedly press >, <, /\, or \/ until the icon for the function you
   want to select is highlighted.  Then press EXE.  The display changes to
   the initial screen for the function you selected.

(br/SM 2/3/98)