Micronta Talking Day Planner
(630-0605)                 Preparation                Faxback Doc. # 41302


SETTING THE TIME

To set the time, set the TIMER/CLOCK/ALARM to CLOCK, then use a
straightened paper clip to press SET CLOCK once.  The hour, minute,
and second digits flash.  Repeatedly press or press and hold down HR,
MIN, and SEC to advance the hours, minutes, and seconds respectively.

NOTES:  AM or PM appears on the display to indicate a time before or
        after noon.

        If you do not press any buttons for about 5 seconds, then use
        a straightened paper clip to press SET CLOCK once.  The hour,
        minute, and second digits flash.  Repeatedly press or press and
        hold down HR, MIN, and SEC to advance the hours, minutes, and
        seconds respectively.

NOTES:  AM or PM appears on the display to indicate a time before or after
        noon.

        If you do not press any buttons for about 5 seconds, the clock/
        planner automatically returns to the time previously set.

USING THE STAND

To use the stand, pull it over the back of the clock.

(LB/km-08/28/1997)