EC-397 66K Electronic Organizer Auto Phone Dialer 
with Illuminator Backlight
(650-0727)                 Transferring Data          Faxback Doc. # 37547


DATA TRANSMISSION

You can transfer telephone directory, schedule, memo, and to-do records
from your organizer to other 66K electronic organizers that have infrared
data transfer capability or to a personal computer using an optional PC
Link cable (available through RadioShack Unlimited).


TRANSFERRING RECORDS BETWEEN ORGANIZERS

NOTES:

     You must first prepare the receiving organizer to accept data and then
     immediately transmit data from the transmitting organizer.

     Do not move the organizers during data transfer.  If you do, the data
     transmission might be interrupted and data might not be stored.  ERROR
     appears in the receiving organizer's display.  If you send a record
     that is the same as one already stored in the receiving organizer, a
     duplicated record is stored.

1.  Place the organizers side by side with the sending organizer on the
    left and the receiving organizer on the right.  The IR TRANSMIT window
    on the sending organizer should be touching the IR RECEIVE window on
    the receiving organizer.

2.  On the sending organizer, select the Phone, Schedule, Memo, or To-Do
    function for the records you want to transfer.  All records from the
    selected function will be transmitted.  

    To transmit an individual record, recall the desired record.

3.  On the sending organizer, press LINK.  TX. RX. ? (T/R) appears.

4.  On the receiving organizer, select the function where you want the
    records stored (should be the same function as the one selected in
    Step 2).

5.  On the receiving organizer, press LINK. TX. RX. ? (T/R) appears.

6.  On the receiving organizer, press R.  RECEIVE BY 1. IR.  2. CABLE
    appears.

7.  On the receiving organizer, press 1 for infrared transfer.
    RECEIVING . . . appears.

8.  On the sending organizer, press T to start the transfer.  
    TRANSMITTING  . . .  appears on the display.

     NOTE:  If there is a delay of more than 8 seconds, the receiving
            organizer displays ERROR  . . . for 2 seconds.

    To cancel the transfer, press C/CE on the sending organizer.  ABORT!
    appears.  Records that were already send before you canceled the
    transfer are stored in the receiving organizer.


TRANSFERRING RECORDS TO A PERSONAL COMPUTER

You can transfer data from your organizer to a computer by plugging a PC
Link cable (available through RadioShack Unlimited) into the PC PORT jack
on the organizer and connecting the cable's other end to the computer.

1.  Load the PC Link software onto the computer according to the PC Link's
    Owner's Manual.  Select "Model G" on the PC Link Menu.

2.  On the organizer, select the Phone, Schedule, Memo, or To-Do function
    for the records you want to transfer.  All records from the selected
    area will be transmitted.

    To transmit an individual record, recall the desired record.

3.  Follow the directions in the PC Link's Owner's Manual to specify the
    serial port used to connect the computer and organizer, and to select
    the same function that you selected on the organizer.

4.  Press LINK. TX.RX.? (T/R) appears.

5.  Type T on the organizer to start the transfer.  TRANSMITTING . . .
    appears.

    To cancel the transfer, press C/CE.


TRANSFERRING DATA FROM A PERSONAL COMPUTER

You can transfer data from a computer to your organizer, by plugging a PC
Link cable (available through RadioShack Unlimited) into the PC PORT jack
on the organizer and connecting the cable's other end to the computer.

1.  Load the PC Link software onto the computer according to the PC Link's
    Owner's Manual.  Select "Model G" on the PC Link Menu.

2.  Follow the directions in the PC Link's Owner's Manual to specify the
    serial port used to connect the computer and organizer, and to select
    the data you want to transfer.

3.  On the organizer, select the Phone, Schedule, Memo, or To-Do function
    where you want to receive the records.  All records from the selected
    area will be transmitted.

    To transmit an individual record, recall the desired record.

4.  Press LINK.  TX.RX.? (T/R) appears.

5.  Press R on the organizer.  RECEIVE BY  1. IR.  2. CABLE appears.

6.  Press 2 to select cable.  RECEIVING . . . appears.


(YO/km-01/28/97)

Privacy Policy