EC-345 Data Bank Scheduler
(650-0945)                 Setting Time/Date          Faxback Doc. # 37480

Using the Timekeeping Function

Home Time and World Time

Your organizer comes with a built-in precision timepiece.  A world time
function show you the current time in any one of 128 major cities around
the globe. You can specify one of these times as your home time, which your
organizer uses for schedule alarms and the daily alarm.

Specifying Home Time

Once you specify one of the time zones as your home time, your organizer
uses that time zone for schedule alarms and the daily alarm.

Press [HOME TIME] [DATA IN/OUT]

Press [FUNCTION], and the following menu appears.

  1  HOME TIME SET
  2  HOME TIME CITY CHANGE
  3  12/24 HOURS

  5  DAYLIGHT SAVING TIME SET/RESET
  6  SOUND

Press [2] to select "HOME TIME CITY CHANGE".

City names appear in alphabetical order.  The time on the right shows the
difference from Greenwich Mean Time (GMT).

Press [\/] or [/\] to scroll through the city names, or [SHIFT] [\/] or
[SHIFT] [/\] to scroll one page at a time.

You can also scroll directly to a specific section of the city list. Simply
enter a letter; the block of names that begins with that letter immediately
appears on the display.  For example, enter "N" to reach the section of the
city that starts with N.

Select your city or the city nearest your city.  Press [SET] after you have
chosen your city.

Finally, press [DATA IN/OUT] to exit data input (IN indicator disappears).
The date will automatically change to the correct date.

Setting the Current Time

Press [HOME TIME] [DATA IN/OUT].  (The IN indicator appears.)

Press [FUNCTION] key.  The following menu appears.

  1  HOME TIME SET
  2  HOME TIME CITY CHANGE
  3  12/24 HOURS

  5  DAYLIGHT SAVING TIME SET/RESET
  6  SOUND

Press [1] to select "HOME TIME SET."

Press [P] [TIME] to switch from AM to PM. You can switch between AM (A) and
PM (P) while the hours digits or minutes digits of the time are flashing.

Enter 11, then [TIME].

Now the minutes digits are flashing.  Make the following entries.

  10  [TIME] 89 [DATE]
  07  [DATE] O6 [DATE]

You can also leave any setting unchanged without making any changes by
pressing [TIME] while the digits for the setting are flashing.

If you press [DATE] while the date digit is flashing, the hour digit starts
to flash again.  After you finish setting the time and date, press [SET].

Finally, press [DATA IN/OUT] to exit data input (IN indicator disappears).


(EB 1/22/97)

Privacy Policy