EC-363  (650-0832)           Secret Memory Area        Faxback Doc. # 3504

If you store telephone directory, schedule, and memo data in the Secret
Memory Area, no one can view this information without entering the right
password.  A password can be up to 16 characters long.  With the password,
you can transfer data back and forth between the Secret Memory Area and
the Open Memory Area.

To create a Secret Memory Area:

1.  On the main menu, highlight the Secret Memory Area icon (ICON SYMBOL.)
    Press EXE.

2.  Type in a password.  A password can be composed of up to 16
    characters, numbers, or symbols.  Choose a password that is easy for
    you to remember, but hard for others to guess;  you'll want to write
    it down elsewhere, so you don't forget it.

3.  Press EXE.

4.  Return to the Open Memory Area by highlighting the Secret Memory Area
    icon in the main menu, then pressing EXE.  The Secret Memory Area
    indicator (ICON SYMBOL) will disappear from the display.

Important Note!

You can have only one password at a time.  Be sure to keep a record of
your password; if you forget it, you'll need to perform a secret reset
operation before you can create a new one.  The secret reset operation
deletes all data stored in the Secret Memory Area!  So it can be very
inconvenient to forget your password!

To enter the Secret Memory Area:

To enter the Secret Memory Area, follow the same procedure we just used to
create the Secret Memory Area.  If you use the wrong password, the
message, "Password Mismatch!" will appear on the display, and the password
input screen will reappear.

Once you're in the Secret Memory Area, you can do everything just as you
would in the Open Memory Area.  But all of the information you input is
stored in the Secret Memory Area, available only to those who know the 
password.

To leave the Secret Memory Area, follow Step 4 in "To create a Secret
Memory Area" above.

To change your password:

1.  Enter the Secret Memory Area.

2.  Press FUNCTION.  Use DOWN ARROW to highlight "Password Change."
    Press EXE.

3.  Type in a new password, then press EXE.  "Password Registered!"
    appears on the display, then the main menu appears.

To transfer data from the Open Memory Area to the Secret Memory Area:

1.  Bring up the information you wish to transfer from a schedule, Data
    Memo "Diary", telephone directory, etc.

2.  Press FUNCTION.  Then use UP ARROW or DOWN ARROW to highlight
    "Open <-> Secret."  Press EXE.  "Password?" appears on the display.

3.  Enter your password, then press EXE.

4.  When the data transfer is complete, the Secret Memory Area screen
    appears, showing the "SYMBOL" indicator.

    To transfer data from the Secret Memory Area to the Open Memory Area,
    use the same procedure as above.  My Magic Diary will not, however,
    ask for your password as part of the process.  After your data has
    been transferred to the Open Memory Area, the display will change to
    show that area, and the "SYMBOL" indicator will not be displayed
    anymore.

(br/all-12/09/94)

Privacy Policy