EC-439 Data Organizer
(650-0849)                  Preparation               Faxback Doc. # 17144

INSERTING BATTERIES

Three lithium batteries (CR2025) are supplied with each new unit and can
be found either in the box, or already inserted in the unit with protective
insulation tape to prevent battery drain during shipment.  Two batteries
are for more battery supply.  One battery is used as the back-up battery.

Remove screws on bottom cabinet and lift bottom cabinet from unit.  If
batteries are already inserted, remove insulation tape.  If batteries not
yet installed, insert batteries (2 x main and 1 x back-up) as marked.  Be
sure "+" mark on batteries is facing you.

QUICK HELP INFORMATION

Pressing any mode key will enter that function in review mode.  To input
new information in Telephone Directory, Schedule, Memo and Expense Manager
press <ENTER> to go to data input mode.  Input information and press
<ENTER> to confirm.

To update Currency Conversion names and conversion values, press <CTRL>
<EDIT>.  Type three letter currency abbreviation and press <ENTER>.  Then
enter conversion value to home currency and press <ENTER> to confirm.  At
least one currency (home currency) should be set to 1.00.

Please see below "SET-UP" to personalize the system settings.

Press any mode key to use the designated feature.  Mode keys can be pressed
to switch back and forth between modes.

When entering or editing information, the enter key must be pressed to
confirm new entry.

The keys should be pressed one after the other.  For example, press <CTRL>
once and release, and then press <EDIT> to enter the EDIT mode.  Do not
press <CTRL> and <EDIT> simultaneously.

The power will automatically switch off if no keys are pressed for
approximately 5 minutes.

A maximum of 512 characters is allowed per record.

When memory is full, the display shows "MEMORY FULL".  Press a mode key
and delete some data to be able to store new data.

INITIALIZING THE UNIT

Before using the product, initialize your Organizer by making your personal
set up for date, time and temperature (data) formats, as well as setting
the key tone and calendar alarm and display contrast settings.

1.  Press <ON> to turn unit on.

2.  Press <CTRL> <FUNC> <3>.

3.  Press <Y> or <N> followed by <ENTER> to confirm each item and move to
    the next.  Use <+> or <-> to adjust display contrast and press <ENTER>
    to confirm an exit set up.

Set up can be accessed to change settings at any time.  Any mode key can
be pressed to exit the set up function.

REPLACING THE BATTERIES

The "BATT" indicator will appear on the display when the main batteries
need to be replaced.  The display will also dim.  Replace the batteries as
soon as possible after BATT indicator appears.  Follow the above
instructions (Getting Started) to replace batteries.  Use only CR2025
lithium batteries.

The back-up battery should be replaced every year as a safety precaution.
Never remove both the main batteries and the back-up battery at the same
time.  Doing so will erase all the data in your Organizer.

After removing the main batteries, DO NOT turn on your Organizer until the
new main batteries are installed into the battery compartment.

Privacy Policy