EC-329  (650-0946)              Storage Capacity       Faxback Doc. # 16603

The EC-329 can store up to 8,144 bytes in memory (excluding the calculator
mode memory). One byte is required for one character in the name, remark
and schedule item entries and one byte is required for two digits in the
telephone number entry.  When there is an odd number of digits in a number
entry, the last digit occupies one byte.  Five bytes are required for a
schedule data entry including the year.  Five bytes are required for
separator spaces in one complete telephone listing (four bytes are required
if nothing is stored in the remark entry) while four bytes are required in
one complete schedule listing.

1.  Press MODE to select the telephone or schedule mode.

2.  Press SHIFT M-CK.  The number of bytes in use and remaining are
    displayed.

3.  Press SHIFT M-CK.  The numbers of phone listings stored in TEL1, TEL2
    and TEL3 files are displayed.

4.  Press SHIFT M-CK.  The number of schedule listings stored is displayed.

    Each time SHIFT M-CK is pressed, the display changes to 2, 3 and 4.

    Pressing displays the entry prompt.

    SHIFT can be omitted after step 2.

    When ENTER is pressed and there is insufficient memory, "FULL! NOT IN"
    is displayed and entry is no longer possible.

    Press "on" C-CE and either delete previously stored listings or change
    the listing to be stored so that it will not exceed the memory
    capacity.

    Repeat the storing procedure once again.

    Since the same memory is used for the telephone and schedule modes,
    the numbers of listings available to be stored in the telephone and
    schedule modes will vary.


(br/all-08/21/95)

Privacy Policy