EC-360 5-in-1 Organizer w/Financial Calculator
(650-0868) Operation Faxback Doc. # 15509
USING THE CALCULATOR
The EC-360 automatically enters the calculator mode two seconds after you
first turn it on. To enter the calculator mode from any other mode (clock,
directory, or data bank), repeatedly press ON/MENU until 0. appears at the
right of the display.
NOTES: If you enter an incorrect value, press CE/C once. Then enter the
correct value and continue with the calculation.
If you press an incorrect function key, simply press the correct
key and continue with the calculation.
Each time you press a function key, the function's symbol appears
in the display's upper right corner.
Memory Calculations
Press MRC twice to clear the memory before beginning a new memory
calculation.
Press M+ to add the result of a calculation to the value in memory.
Press M- to subtract the result of a calculation from the value in memory.
Press MRC once to recall the value stored in memory.
Markup Calculations
The markup function helps you easily find an item's selling price based on
the cost and the desired profit margin, and also lets you determine the
gross profit margin given the cost and selling price.
The gross profit margin is the percentage of the selling price that is
profit.
USING THE CLOCK
To display the time, repeatedly press ON/MENU until the current date and
time appear on the display.
----------------------
| 01-01-1900 MO |
| 00-00 00 |
| |
----------------------
To switch the clock between standard and daylight saving time, press DST
while the date and time appear.
----------------------
| 01-01-1900 MO |
| 01-00 00 |
| DST |
----------------------
USING THE DIRECTORY
To enter the directory mode, repeatedly press ON/MENU until NAME? DATA
appears on the display.
The EC-360's directory lets you store up to 50 records. Each record can
have a name of up to 12 characters, and a telephone number of up to 12
digits.
USING THE KEYPAD
Each number key (0 through 9) has red characters above it.
In the directory mode, each time you press a number key, the display
sequences through the characters above it and the number.
NOTES: If you enter an incorrect character or digit, while the cursor is
flashing, press left or right arrow to move the cursor to the
incorrect character, then re-enter the correct character or digit.
To enter more than one character using the same number key, press
right arrow then enter the next character.
To enter a character space, press right arrow.
To enter a dash between digits, press - (minus).
ENTERING A RECORD
Follow these steps to enter a name and phone number into the directory:
1. While NAME? DATA appears on the display, enter the name using the
number keys that correspond to the desired characters.
2. Press ENTER. The directory stores the name in alphabetical order and
the cursor moves down to the second line so you can enter the
telephone number.
3. Enter the phone number (if desired), using the number keys.
NOTE: You can enter a hyphen (-) in place of any digit.
4. Press ENTER. The directory stores the phone number with its associated
name entry. NAME? DATA and the total number of records appear on the
display.
RECALLING A RECORD
You can use one of two methods to recall a name and phone number --
scrolling through the entries or entering the first letter of a name.
Scrolling Through the Entries
To scroll through all of the entries in the directory, while NAME? DATA
appears on the display, press up or down arrow. The display scrolls
through the entries in alphabetical order.
Entering the First Letter of a Name
Follow these steps to search for a record by entering the first letter of
a name.
1. While NAME? DATA appears on the display, enter the first letter of the
name you want to recall.
NOTE: If several records have the same first letter, you can enter as
many additional letters as necessary.
2. Press down or up arrow. The display shows the first matching entry.
NOTES: If the directory does not find a matching entry, NOT FOUND appears
on the display.
To scroll through entries starting from the displayed one,
repeatedly press down arrow to scroll forward or up to scroll
backward.
EDITING RECORDS
Follow these steps to edit a stored record (change, delete, or insert
characters in a name or digits in a phone number).
1. While NAME? DATA appears on the display, recall the record you want to
edit.
2. Press right arrow once to enter the edit mode. The first character in
the name flashes.
3. To edit the name, repeatedly press right arrow until the character you
want to edit flashes.
To edit the phone number, press down arrow then repeatedly press right
arrow until the digit you want to edit flashes.
4. To change the character/digit, simply enter the correct one. The new
character/digit replaces the previous one.
To delete the character/digit, press SHIFT then DEL. The character/
digit disappears from the display and all characters/digits to the right
of the deleted one shift one space to the left.
To insert a character/digit, press SHIFT then INS. Starting from the
flashing one, all characters/digits shift one space to the right. When
the cursor flashes in the newly created space, enter the desired char-
acter/digit.
5. When the information in the record is correct, press ENTER to store
it.
DELETING A RECORD
1. While NAME? DATA appears on the display, recall the record you want to
delete.
2. Press SHIFT then DEL. DELETE = Y/N appears and N flashes.
3. To delete the record from the directory, press left arrow to select Y,
then press ENTER.
To keep the record in the directory, simply press ENTER.
USING THE DATA BANK
You can use the data bank mode to perform special functions in these five
areas.
Conversions
Scientific Calculations
Financial Calculations
World Time/Telephone Guide
Time Items
To enter the data bank mode, repeatedly press ON/MENU until "1. CONVERSION"
appears on the display.
The display shows the current data bank option in the first line and the
total number of options in the second line. You can perform the specific
functions (convert, calculate, display, or set) only when you get to the
level where the values are asked for or displayed.
Performing the special functions requires only three basic steps:
Selecting the option.
Entering the desired values (if required).
Displaying the results.
Selecting the Option
To select an option, either press the desired option's number or press
left or right arrow until it appears in the first line of the display.
Then press ENTER.
NOTE: If you select a wrong option, press CE/C to return to the previous
menu, then select the correct one.
Entering the Desired Values
After you select the desired option, press ENTER until a prompt appears on
the display followed by an = (for example, inch =, m =, ounce =) or a cursor
flashes. Then enter the desired value.
Displaying the Results
After you enter the desired value, press ENTER. The display shows the
results of a conversion or calculation.
DATA BANK NOTES
Conversions: Before you try to make any conversions, you must first set
the current conversion rates.
You can change the name of all five currency rates using up
to three characters per name.
Financial Calculations: The following abbreviations appear on the display
when you use the financial function.
Display Meaning
AC Accumulation
BAL Balance
D Deposit
FD Fixed Deposit
FV Future Value
INT Interest
INT.RATE Interest Rate
PV Present Value
PMT Payment
PRN Principal
World Time/Telephone Guide:
Once you enter the world time/telephone guide function, repeatedly press
down arrow until the desired country or state in the time zone you want
to check appears on the display.
After you select the country or state, press ENTER to see the country's
or state's capital city, date, time and telephone dialing code.
The long-distance telephone dialing codes cannot be changed or deleted.
Time Items:
The EC-360 lets you set two daily alarms and two schedule alarms. Each
of the two daily alarms beeps at a specified time of day, every day.
Each of the two schedule alarms beeps only once -- at a specified date
and time.
When you turn on an alarm, the alarm symbol appears on the bottom of the
display. At the specified time, the alarm beeps for 1 minute. Press
any key to silence the alarm sooner.
Once in the Time Item menu, the user can--
Press 1 to set Time
Press 2 to set Alarm Time
Press 3 to use Day Count
Press 4 to set Date After (display returns with day of the week when
a date and a number are entered)
Press 5 to set Date Before (display returns with day of the week when
a date and a number are entered)
(TE/ir-12/04/95)
Privacy Policy