MVX-605/605XL Audiovox Cellular Phone
(170-1257)                 NAM Programming            Faxback Doc. # 57554

The NAM data can be entered into each address directly through the keypad.  
No external equipment is needed.  In most cases, it is required to program 
only the Area Code, Phone number, System ID and Unlock code.

1.  Enter the programming mode by locking the unit, [FUNC][5][LOCK CODE]
    (a new unit is shipped locked).

2.  Press [FUNC][#][6][2][6][#][FUNC]  The software version will be
    displayed.

3.  Press [SEND]  The ESN will be displayed.

4.  Press [SEND]  This will take you to item 01.  Proceed as follows:

ITEM    DESCRIPTION               ENTRY         PRESS

01      AREA CODE ............... XXX           SEND
02      MOBILE PHONE # .......... XXXXXXX       SEND
03      SYSTEM ID ............... 00001-32767   SEND
04      ACCESS OVERLOAD ......... 00-15         SEND
05      GROUP ID MARK ........... 00-15         SEND
06      LOCAL USE ............... 0 or 1 (1)*   SEND
07      MIN MARK ................ 0 or 1 (1)*   SEND
08      LOCK CODE ............... XXX**         SEND
09      AUTOMATIC LOCK .......... 0 or 1 (0)*   SEND
10      CALL RESTRICTION CODE ... XXX***        SEND
11      CALL TIMER CODE ......... XX            SEND
12      CUM. TIMER CODE ......... XX            SEND
13      EMERGENCY NUMBER ........ XXX**         SEND
14      KEYPAD DISABLE .......... 0 or 1 (0)*   SEND
15      RESERVED .............................. SEND
16      RESERVED .............................. SEND
17      AUTOMATIC REDIAL ........ 0 or 1 (1)*   SEND
18      RESERVED .............................. SEND

*0 = DISABLED, 1 = ENABLED
** MUST NOT BE 911, 000, 119 OR EMERGENCY NUMBER
*** MUST NOT BE THE SAME AS THE LOCK CODE

After you have entered the above information, press [END][FUNC][END] to 
store the information.  "STORING" will display and phone will wake up.

Simple NAM Programming

The following procedure explains how to re-program Telephone Number and 
SID using simple NAM Programming method.

ITEM    KEYPAD                                     PRESS

1.      PRESS [PWR] AND [R/S] SIMULTANEOUSLY TO
        ENTER PROGRAMMING MODE. .................. -----
2.      ENTER 10 DIGIT TELEPHONE NUMBER .......... SEND
3.      ENTER SID ................................ SEND
4.      PRESS END TO STORE AND EXIT .............. -----

Enhanced SID Management

The MVX 605 is capable of storing up to 60 CIDs in any combination of 
brother/sister or cousin.  The following procedure explains how to enter 
programming and enter the information.

ITEM    KEYPAD                                            PRESS

1.      POWER UP PHONE .................................. -----
2.      ENTER PROGRAMMING CODE [7743][FUNC][04] ......... -----
3.      ENTER [0] for BROTHER/SISTER or [1] for COUSIN .. SEND
4.      ENTER SID NUMBER (ie. 00022) .................... SEND
5.      FOR EACH SID REPEAT STEPS #3 & #4

Notes:  A.  To go to a specific address, press [END][n][n][SEND]
            (nn = address).

        B.  To store and exit programming press, [END][FNC][END].

Inhibit SID Programming

The following procedure details the procedure to enter inhibit SIDs.  You 
may enter up to 10.

ITEM    KEYPAD                                            PRESS
1.      POWER UP PHONE .................................. -----
2.      ENTER PROGRAMMING CODE [4743][FNC][05] .......... -----
3.      ENTER SID NUMBER (ie. 00001) .................... SEND
4.      REPEAT STEP #3 FOR EACH SID NEEDED

Notes:  A.  To go to a specific address, press [END][n][n][SEND]
            (nn = address).
        B.  To store and exit programming press, [END][FNC][END].

(EB 11/19/99)