Motorola Model 13241  3-Watt Portfolio Phone
(170-1245)                 Advanced Features          Faxback Doc. # 50656

Feature      This menu feature allows you to easily enable the following
Menu         special features of your cellular phone.

             To enter the feature menu, press [FCN], [1].  Press [#] to
             scroll forward through the items, and [*] to scroll backwards
             The menu allows you to turn these features on and off using
             [0].  The first press of [0] selects the feature, the next
             press turns it off.  - indicates the feature is not
             selected.  (_) indicates the feature is not selected.  []
             indicates that it is selected.

             Note: Signal Strength Meter is an exception to this rule, and
                   is enabled when _ is displayed.

             Display                       Feature

             SignAL OFF                    Signal Strength Meter

             AnSWr AutO                    Automatic Answer

             EMrCY OFF                     Emergency Dialing

             HAnguP For HF                 Automatic Hands Free

             EXtEnd tiME                   Extended Talk Time

             hF PrEF'd                     Enhanced Simplex Hands Free

             Answr MKey                    Multiple Key Answer

             Rmind Beeps                   Reminder Beeps

             Pin Active                    PIN Code

             Press [END CLR] to exit the feature menu.

Call         Memory Locations 1-10 Only (Service Level 1)
Restric-     Press [FCN], [0].  Enter your six-digit security code, then
tions        press [1], [#]. Level 1 will be displayed.  (Numbers cannot
             be entered through the keypad or stored when this call
             restriction is enabled, though memory locations 1-10 can be
             accessed by pressing [RCL], memory location, and [SND].)
             To return to normal (standard) operation, press [FCN], [0],
             enter your six-digit security code, then press [4], [#].
             Level 4 will display, indicating normal operation.

Reminder     Reminder tone is an audible message to alert the user that
Beep         they have received a short message.  It will beep every two
(on select   minutes until the new messages are read.
models)
             Your cellular carrier may offer enhanced features, such as
             short messaging.  Ask your cellular service provider if this
             is supported in your system.  If short messaging is not
             supported in your system, reminder beep selection will have
             no effect.

             To activate, press [FCN],[1]. Scroll the menu by pressing [*]
             or [#] until _Rmind _Beeps displays. Press [0] once to toggle
             this feature on ([]), and again to toggle it off (_). To exit
             the Feature Menu, press [END CLR].

PIN Code     Your cellular carrier may require a personal identification
Activation   number (PIN) when placing outbound calls.  This code assures
             the cellular system that the person placing the call is an
             authorized user.  Ask your cellular service provider if this
             is required in your system.

             Only select this feature if your cellular service provider
             requires it.

             This feature will allow you to automatically send your PIN
             code with all outbound calls. If Invalid PIN displays, check
             to see if you have activated the feature in the menu without
             storing a PIN number in memory location 7. The PIN code must
             be less than seven digits.

             If you enter a service area which does not require a PIN code
             disable the feature in the feature menu.

             To activate the PIN code, press [FCN], [1].  Scroll the menu
             by pressing [*] or [#] until _PIN_Active displays. Press [0]
             once to toggle this feature on ([]), and again to toggle it
             off (_). To exit the Feature Menu, press [END CLR].

             To store the PIN code into memory location 07, enter the PIN
             code.  Press [FCN], [RCL].  Press [0], [7].

             To place a call with PIN code active, enter the number to be
             called, or recall it from memory.  Press [SND].  Wait for
             double tone - "beep, beep."  Press [SND].  The phone will
             automatically send the PIN code stored in memory location 07.

Horn Alert   Use Horn Alert to activate your horn or headlights if you
             will be outside the vehicle and expect a call by pressing
             [FCN], [4]. (Helpful Hint - H for Horn appears on [4].  ALrt
             (Alert) will display.  Next, turn off the ignition key. The
             external alert (e.g., horn) will be activated only if the
             ignition has been switched off.

             To cancel Horn Alert, press [FCN], [4] or turn your vehicle
             ignition on.  To preserve your vehicle's battery, your unit
             will automatically turn off if left active for eight hours.

             Note:  Horn Alert is an optionally installed feature and will
                    operate in this fashion in a mobile configuration only

Display      Press [RCL], [#] to display the telephone number of your
Your Own     mobile phone.
Telephone
Number

(BR/eb 11/16/98)