NOKIA 2160 Cellular Telephone
(170-1227)                 Voice/Text Messages        Faxback Doc. # 48779

Please check with your operator for the availability of message features.

Voice Messages

When you receive a voice message, the phone beeps, lights the voice
message indicator (o_o), and displays NEW VOICE MESSAGE.  The phone shows
the number of messages if there are more than one.

To use the methods described below to call your voice mailbox, you must
store your voice mailbox number in your phone, which is described in this
section.

To call your voice mailbox after receiving a message

With NEW VOICE MESSAGE on display,

- > left [-] (Listen) OR

- > [SND].

Note that your voice mailbox number must be stored in the phone to use
this method (see below).

To call your voice mailbox any time

Press and hold 1

To store your voice mailbox number in the phone

- > Left [-] (Menu) 2 3.

- > key in voice mailbox number.

- > left [-] (OK).

Once you enter the number, it is used until you change it again.

Note:  The voice mailbox may be provided by the network (and the network
       operator gives you the number to call) or you may make use of your
       own answering machine.

Text Messages

When the text message network service is available and you have subscribed
to it, your phone can receive and store text messages.  The text message
function is a network service and may not be supported by your network.

Also, to use text messaging, you must have the phone number of your
message service center available.  The phone can store up to 30 text
messages, with a maximum of about 1,900 characters for all messages
combined.  Contact your network operator for details about the text
messaging service and the maximum number of characters allowed in a
message.

The network may have its own default message that is displayed when the
phone is in the network coverage area.  This does not prevent the use of
your phone in any way.

Reading Text Messages

When you receive a text message and there is enough space left in the
message memory, (nn) NEW TEXT MESSAGE(s) (or NEW URGENT or NEW EMERGENCY
MESSAGE if applicable) and the indicator (envelope) are displayed.  See
"The Display" in Faxback Doc. # 48776 for a description of the Text
Message indicator.

To read messages immediately

With NEW TEXT MESSAGE(s) on display, press left [-] (Read).

To read text messages any time

Press right [-] (Quit), then later:

- > left [-] (Menu) 2 2.

- > press \/ to view the first message.

- > scroll message(s) with \/ or /\.

The messages are shown in the order that they were received or stored.
New messages are shown first, in their order of priority, then old
messages, in their chronological order.

NEW indicates an unread message and is followed by the date and time of
receipt.

OLD indicates that the message has already been read.

URGENT indicates that the message received was marked "urgent" by the
sender.

EMERGENCY indicates that the message received was marked "emergency" by
the sender.

LOCKED indicates that you have locked the message.  It will not be
overwritten even if there is no more space in memory and there is an
attempt to deliver a new message to your phone.

The Option soft key

With message on screen,

- > press left [-] (Option).

- > \/ to option you want.

- > left [-] (OK).

Read next shows the next message.

Erase deletes the current message from memory.

Lock/Unlock allows you to lock and unlock messages.  When a new message
arrives and the message memory is full, the new message automatically
overrides old messages unless they are locked.

Call back displays the first number from the current message and calls
that number.  You can also just press [SND] while the message is displayed
to call back a number in the message.

Setting your phone to "Pager Mode"

- > Left [-] (Menu) 3 8.

- > \/ to On.

- > left [-] (OK).
OR
- > left [-] (Menu) #.

With the "Pager Mode" set to On, you can receive Voice Mail Notification
and Text Messages.  You do not receive any incoming calls.  When you set
"Pager Mode" to On, the message PAGER ONLY is displayed.  The default
setting is Off.  "Pager Mode" is a network service.  Please check for the
availability from your network operator.

(BR/eb 7/16/98)

Privacy Policy