Qualcomm QCP-820 Cellular Phone
(170-1219)                 Preparation                Faxback Doc. # 47376

ANTENNA

Alright, then.  All those in favor of better voice quality and reception,
raise your antenna to the full and upright position.

TURNING THE PHONE ON AND OFF

Turning on

Make sure that the charged battery pack has been installed in the back of
the phone or that you have external power (meaning the AC adapter,
cigarette lighter adapter, or car kit is plugged in).

1.  Press PWR for a few seconds until you see "LOOKING FOR SERVICE" on the
    screen.

2.  There is no number two.

    But thank you for your rapt attention.

Turning off

1.  Press [PWR] for a few seconds until "POWERING OFF" is displayed.

2.  Release [PWR].

When your power is off, nothing displays on the screen (unless you are
charging your battery).

Note: If [PWR] is pressed for less than 1 second, the phone will turn off.
      You must exert power on the button, in other words, for longer than
      one second.

STANDBY STATUS

Standby is the most basic state of the phone.  The phone goes into standby
status soon after turning on or whenever [END] is pressed. When in standby
status, you will typically see the programmable banner (in Faxback Doc.
# 47379), the time and date, and also have access to the directory and
features.

(LB/eb 4/29/98)