Nokia 252 Series Cellular Telephone
(170-1223/4/5/9/30/31)     Accessories                Faxback Doc. # 47265

Note:  The procedures in these documents apply to the following Nokia 252
       Series Cellular Telephones (6 total):

         170-1223/29 - Woodgrain Finish
         170-1224/30 - Gun Metal Finish
         170-1225/31 - Black Finish (Sold in California ONLY!)

The only differences between the six phones are those noted above.

An extensive range of accessories is available for your phone. You can
select the accessories that best suit your specific communication needs.

For availability, please check with your local dealer.

A few practical rules for accessory operation:

   Keep the accessories out of small children's reach.

   When you disconnect the power cord of any accessory, grasp and pull the
   plug, not the cord.

   Check regularly that all cellular phone equipment in a vehicle is
   mounted and operating properly.

   Installation of complex car equipment must be completed by qualified
   personnel only.

WARNING!: Use only batteries, chargers and accessories approved by the
          phone manufacturer for use with this particular phone model. The
          use of any other types will invalidate any approval or warranty
          applying to the phone, and may be dangerous.

Batteries

Several batteries are available for your phone:

   BKH-6 Extended NiCd 1100 mAh (left side)

   BKL-6 Extended Vibra NiCd 1100 mAh (middle)

   BMH-2 Light NiMH 550 mAh (right side)

For detailed battery information, including charging, talk, and standby
times, see "Battery Information", beginning in Faxback Doc. # 47260.

ACP-7 Travel Charger

Use this durable and economical charger to charge all battery options.
Plug the charger into a wall outlet and connect the connector to the
bottom of your phone.  Check the charging status on the phone display.
(See "Charging Times" in Faxback Doc. # 47260.)

Calls can be made during charging, but charging will stop for the duration
of the call and the battery bar scrolling stops.

Note:  If the battery is completely empty, you cannot use the phone until
       it has enough charge to operate.

The Travel Charger is available for different voltage levels and can also
be used with the CGH-10 Compact Desktop Charging Stand.

ACP-9 Rapid Travel Charger

The extremely light, functionally designed Rapid Travel Charger charges
your phone battery quickly. (See "Charging Times" in Faxback Doc. # 47260)

Plug the charger into a wall outlet and connect the connector to the
bottom of your phone.  Check the charging status on the phone display. You
can use your phone while charging.

Operating within a voltage range of 100V-240V AC (50 Hz-60 Hz), the Rapid
Travel Charger is practically voltage-independent in normal office and
household use.  Like the Travel charger, the Rapid Travel Charger is
compatible with all battery options.  The Rapid Travel Charger can also be
used with the Compact Desktop Charging Stand CGH-10.

LCH-9 Rapid Cigarette Lighter Charger

The multivoltage Rapid Cigarette Lighter Charger ensures that your phone
is always ready for use wherever you travel.  The small charger's
functional design fits well with most car lighters and interiors.

Charging Times are the same as for the Rapid Travel Charger ACP-9 (see
"Charging Times" in Faxback Doc. # 47260).  Calls can be made during the
charging.

A green light indicates that the Rapid Cigarette Lighter Charger is ready
to charge.  Check the charging status on the phone display.  The input
voltage is 12 or 24 V DC, negative grounding.

The Rapid Cigarette Lighter Charger can be used with all accessories
available for your phone.

Avoid prolonged charging with the Rapid Cigarette Lighter Charger when the
car engine is not running. This may cause the battery of your car to drain

Note:  In some cars the cigarette lighter plug is not provided with power
       when the ignition is switched off.  Verify that the green LED light
       is lit.

CGH-10 Compact Desktop Charging Stand

The Compact Desktop Charging Stand provides mounting for both the phone
and a spare battery.  Plug the charger into a wall outlet and connect the
connector to the back of the Compact Desktop charging Stand.  Place your
phone and/or a spare battery in the stand to begin battery charging. Check
the charging status of the phone battery on the phone display.

When the phone is charging, no lights are displayed on the stand.  When
charging is complete, the stand's indicator light blinks.

Compatible with all battery options, the Compact Desktop Charging Stand
can be used with the Travel charger ACP-7 or the Rapid Travel Charger
ACP-9.

The phone has the built-in intelligence to maintain the battery, so there
is no need for a discharge feature on the stand.

The spare battery charger status indicator is located on the front of the
charging stand for easy viewing.  The front slot charger status indicator
is built into the phone.  It is displayed on the screen and supported by
audible confirmation tones.

BCH-10 Belt Clip

The belt clip lets you easily wear your phone.  To attach the belt clip to
the phone, first remove the battery.  Next slide the metal clip onto the
back of the phone, then replace the battery.  Attach the clip holder to
your belt and slide the metal clip into the holder until it locks.

To release the phone from the clip holder, press the release button on the
top of the holder.

(BR/eb 4/20/98)