Cellular Telephone
(170-1204/05/06) Specifications Faxback Doc. # 46534
Technical Specifications:
Frequency Range: ........................ 824.04 to 848.97 MHz transmitter
869.04 to 893.97 MHz receiver
Number of Channels: .................................................. 832
Frequency Stability: ......................................... +/- 2.5 ppm
RF Power Output: ........................................ 0.6 Watt nominal
Input/Output Impedance: ................................. 50 Ohms nominal
Spurious and Harmonic: ........ Complies with the Title 47, Part 22 of the
Code of Federal Emissions Regulations
Audio Distortion: ......................... Less than 5% @ 1 kHz +/- 8 kHz
Hum and Noise (C-MSG): ............................. 32 dB below +/- 8 kHz
deviation @ 1 kHz
Modulation: .............................. F3: +/- 12 kHz for 100% @ 1 kHz
Audio Response: ............................. 6 dB per octave pre-emphasis
Environmental Specifications:
Operational Temperature: ......................... - 22 to + 140 degrees F
(- 30 to + 60 degrees C)
Shock: .................................... Exceeds EIA Standards RS 152 B
(Section 15) and 1S-19
Drop: ...................................... Exceeds EIA Standard RS 316 B
Humidity: .................................. 90% to 95% relative humidity:
meets EIA Standard IS-19
Vibration: ...................... Exceeds EIA Standards RS 316 B and IS-19
Rain: .......................... Rain test of five minutes on each surface
Dust: ............ 140 mesh blown silica flour test, tested for five hours
Salt Fog: ................ Salt solution fog at 9 degrees C (35 degrees F)
tested for 48 hours
(LB/EB 2/18/98)
Privacy Policy