Cellular Telephone
(170-1204/05/06)           Message Glossary           Faxback Doc. # 46533

'           (Apostrophe), scrolling activated.

o           Feature is selected (also indicates a pause in memory).

R           How [*] is displayed when stored in memory.

AnSWEr      Automatic Answer selected.

AnSWr AUED  Automatic Answer feature.

AUtoLoc     Automatic Lock selected.

A 1         Two Telephone Number Capability (Active system is
            non-wireline, using phone number 1).

A 2         Two Telephone Number Capability (Active system is
            non-wireline, using phone number 2).
      _ _
b _ - - -   Battery Voltage Meter (number of bars indicates relative
            level of voltage).

b1          Two Telephone Number Capability (Active system is wireline,
            using phone number 1).

b2          Two Telephone Number Capability (Active system is wireline,
            using phone number 2).

C           Precedes Cumulative Timer display (also how [#] is displayed
            when stored in memory).

CALL        Shows incoming call, Call in Absence, or weak Signal Alert.

CALL bAC    Calling Line Identifier.

EMrGCY      Emergency Dialing.

EMr OFF     Emergency Dialing deactivated.

EMrCY OFF   Emergency Dialing feature.

HOME        System Type Selection (Home mode).

LEVEL 1     Call Restriction Selected.

LEVEL 4     No call restriction selected.

L dtMF      Long Tone DTMF selected.

LoBAt       Low Battery.

Loc         Preceded unlock code when displayed.

LOC AUtO    Automatic Lock feature.

Loc'd       Unit is locked.

MESSGE      Short Message.

MUtE        Microphone muted, telephone is on.

Pin         PIN Code Activation selected.

Pin ActivE  PIN Code Activation feature.

PrEF'dS.dS  System Type Selection (Preferred SIDS only).

r           Precedes display of Resettable Call Timer.

rEdiAL      Automatic Redial selected.

rMdOFF      Reminder Beeps deactivated.

rMindbEEPS  Reminder Beeps feature.
      _ _
S _ - - -   Signal Strength Meter (SSM) (number of bars indicates relative
            signal strength).

SCAnA       System Type Selection (scan non-wireline 'A' only).

SCAnAb      System Type Selection (scan 'A' type first, then 'B').

SCAnb       System Type Selection (scan wireline 'B' only).

SCAnbA      System Type Selection (scan 'B' type first, then 'A').

SiG oFF     Signal Strength Meter deactivated.

SiGnAL OFF  Signal Strength Meter feature.

Std         All user features set to standard.

StdAb       System Type Selection (non-wireline standard mode).

StdbA       System Type Selection (wireline standard mode).

vOiCE       Voice mail message.
      _ _
v _ - - -   Volume Meter(number of bars indicate relative volume level).

VoX         Voice Operated Transmission (VOX) selected.

vOX MOdE    VOX mode feature.

(LB/EB 2/18/98)

Privacy Policy