SPP-SS960 Spread Spectrum 900MHz Cordless Phone w/Caller ID
(430-8014)                 Installation               Faxback Doc. # 46206

Additional information

Mounting the base unit on a wall

1.  Reverse the hang-up tab.

2.  Plug the telephone line cord to the LINE jack and the AC power adapter
    to the DC IN 9V jack, and hook the cords.  Use the shorter cord for
    mounting.

3.  Attach the wall bracket to the center of the base unit.
               /\
    Align the /__\ marks of the wall bracket with those of the base unit.

4.  Plug the telephone line cord into the telephone outlet, and hook the
    base unit to the wall plate.

5.  Plug the AC power adapter into an AC outlet. Then raise the antenna so
    that it points towards the ceiling.

    Tip:  To remove the wall bracket, press the lower tabs.

(br/EB 1/9/98)